Enclosures, Racks, Cabinets & Panel Products


19" rack enclosures for industrial environments

4 April 2007 Enclosures, Racks, Cabinets & Panel Products

Sarel’s Spacial 3D enclosures have been designed for use in electronics, IT, LAN and communications applications in dirty industrial environments. The protection degree is IP 66 (totally dust-proof and resistant to strong jets of water) and impact resistance is IK 08 (5 Joules).

Two types of enclosures are available: 1- and 2-body. The 1-body enclosures are available either with fixed or swing type 19” rack frames and are 600 mm wide, 400 mm deep and can be ordered in six heights: 300 mm (4U), 400 mm (7U), 500 mm (9U), 700 mm (13U) and 800 mm (16U). The 2-body versions are supplied in the same heights but in depths of either 400 or 500 mm and complete with fixed 19” rack.

The doors have a 4 mm thick safety glass window, are bevelled and double-folded for high rigidity and strength. Excellent sealing is provided by a continuous foamed-in gasket and further enhanced by a gutter profiled and double-folded front of the enclosure body. The enclosures are supplied with a double bar lock and a selection of alternative locking mechanisms such as padlocking handles is available if security is an issue. Cable access is facilitated by gland plates in top and bottom.

The enclosures are fabricated from phosphated, chromate-passivated mild steel, finished with a polyester-based epoxy-modified powder coating, which provides an excellent resistance to weathering, corrosion and mechanical impact.

Accessories include 19” front plates, wall mounting brackets and a full range of ventilation and cooling accessories such as the new Tropico range of filter fans, Peltier and Vortex coolers.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Enclosures for small table-top instruments
30 September 2020, Avnet Abacus , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Enclosures for mounting electronic applications
30 September 2020, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove ...

Read more...
Stylish new plastic enclosure family
30 September 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Electronics has announced its new 1557 family. Initially available in four plan sizes, each in two heights, it is available in polycarbonate sealed to IP68 and ABS designed to meet IP66. The sizes ...

Read more...
Range of DIN rail enclosures
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
The CNMB range of DIN rail enclosures provides a diverse selection of modular housings which are available in eight set lengths. They are optimised for a wide range of electrical and electronics industries ...

Read more...
Rittal’s range of compact and small enclosures
30 September 2020 , Enclosures, Racks, Cabinets & Panel Products
After more than 50 years and 35 million enclosures sold, Rittal has introduced its small and compact enclosures in the form of the AX and KX series. According to managing director of Rittal South Africa, ...

Read more...
Versatile rack cases
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
Rack cases are a key building block of rack mounting systems, enabling electronic, electric and electro-mechanical sub-systems and assemblies to be mounted easily in any standard 19” enclosure. For ...

Read more...
Industrial enclosures in stainless steel
31 August 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The IP66 EJSS family from Hammond Electronics is available in 304 or 316 grade stainless steel, supplied as standard in a natural smooth brushed finish. Sealed to IP66, the EJSS is designed for use as ...

Read more...
Navigating EMI challenges in next-generation railway technology
31 August 2020, Actum Group , Enclosures, Racks, Cabinets & Panel Products
The advent of new-age connectivity, such as 5G networks and LTE, has enabled railway systems to process higher volumes of data digitally, which has significantly improved operational safety, efficiency ...

Read more...
DIN rail enclosures
30 June 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has announced its 1597DIN family of UL94-V0 flame-retardant plastic enclosures for mounting to standard IEC/EN 60715 35 mm DIN rails for applications such as industrial control equipment, ...

Read more...
Company profile: Rittal
30 June 2020, Rittal , Enclosures, Racks, Cabinets & Panel Products
Rittal was founded by Prof. Friedhelm Loh in 1961 in Herborn, Germany. The enclosure specialist forms part of a larger family-owned group called the Friedhelm Loh Group. Today, the company has 10 000 ...

Read more...