Hamamatsu Photonics says that its new G8931-04 InGaAs APD receiver offers higher sensitivity than conventional InGaAs PIN photodiodes. The device features very high speed of typically 4 GHz and when combined with its very high sensitivity, the receiver is ideally suited for long distance optical communications applications.
At telecoms wavelengths of 1310 nm and 1550 nm, the InGaAs diode has typical photosensitivity of >0,8 A/W, and can operate with an avalanche gain of ≥10, thus giving an output of at least 8 A/W. The device has extremely low capacitance (typically 0,35 pF) thus enabling operation with industry standard IC chips and simplifying high-speed circuit design.
The device can be supplied with a fibre-optic pigtail, or it can be supplied with standard fibre connector types to meet customer requirements, for example SC/SPC, FC/SPC, etc. Its characteristics also make it a suitable device for other applications such as range finding, OTDR, test equipment and low light level analytical infrared measurements.
Heat-resistant LEDs
Opto-Electronics
Würth Elektronik’s new RGB LEDs are characterised by excellent heat resistance with an insensitivity to temperatures from -40 to 100°C making them ideal solutions for reliable, colour-variable lighting in applications at high operating temperatures.
Read more...PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
Read more...PIN photodiode with integrated lens RFiber Solutions
Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version