Telecoms, Datacoms, Wireless, IoT


Fixed and temperature variable chip and coaxial equalisers

5 September 2007 Telecoms, Datacoms, Wireless, IoT

EMC Technology has introduced an entire line of new surface mount chip and coaxial equalisers designed to compensate for frequency variations in RF and microwave subsystems. These equalisers are available in versions for fixed frequency response and temperature variable frequency response. In addition, the company can develop custom variations specific to the frequency band and temperature slope characteristics of a customer's application. All equalisers are available with both negative and positive slope coefficients.

The 3,3 mm² CE chip equaliser offers linear broadband fixed slope frequency compensation from 2 to 18 GHz in 1 to 4 dB values. EMC also offers the TVE, a temperature variable equaliser in the same package size in various compensation and temperature coefficients from 2 to 18 GHz and a temperature range from -55 to +125°C.

The CE and TVE chip equalisers are also available in a coaxial body with an SMA plug to SMA jack interface and frequency compensation from 2 to 8 GHz. They use an all-passive construction designed specifically to offset amplitude variations, which result from mismatched discrete components, materials and signal channel effects. These equalisers have an internally matched network, offering an advantage over other varieties of frequency equalisers that use a pass-through element only, resulting in poor VSWR and non-linear variations. Active element frequency response equalisers drift over time and react with radiation effects. The all-passive design eliminates these effects, offering high reliability and stable response over the life of the devices and making them ideal for military and space applications.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Macom targets broadband radar with time delay MMIC
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Macom’s MADU FR1012 is a GaAs MMIC 1-bit true time delay device covering 4 GHz to 12 GHz, designed for broadband microwave systems where beam accuracy and signal integrity are critical.

Read more...
Compact analogue phase shifter
RF Design Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.

Read more...
Wireless connectivity expanded
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.

Read more...
Integrated X-band radar front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.

Read more...
Introducing Aurata
CST Electronics Telecoms, Datacoms, Wireless, IoT
Antenova has launched Aurata SR4L112: a compact, high efficiency embedded 4G/LTE antenna engineered for long, narrow PCB designs.

Read more...
Multi-constellation GNSS module in a legacy-compatible footprint
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.

Read more...
Quectel expands 5G portfolio
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.

Read more...
Surface mount power amplifier for high-power applications
RF Design Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.

Read more...
Compact RTK design: More than just the receiver
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.

Read more...
Microchip advances Space-Grade timing performance
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip Technology has expanded its atomic clock portfolio with the radiation-tolerant Space CSAC-SA65, a Chip Scale Atomic Clock designed to deliver precise timing for space systems.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved