Power Electronics / Power Management


Configurable dual-phase PWM buck control ICs

19 September 2007 Power Electronics / Power Management

International Rectifier has introduced two dual-channel synchronous buck control ICs with integrated high performance drivers for medium to high current point-of-load (POL) buck converters used in networking, computing, and communications systems.

The IR3622MPbF and IR3622AMPbF can be configured to support a single output in current share mode, capable of delivering up to 80 A, or to support two independent outputs. The independent channels run 180° out of phase, and reduce the required input capacitance requirement. A significant reduction in output ripple voltage is achieved in single output mode.

The IR3622MPbF targets 12 V single input applications while the IR3622AMPbF can support 5 V and 12 V applications. Key protection features include selectable hiccup or latched current limit, pre-bias start-up, thermal shutdown protection and under- and over-voltage protection.

The devices feature a programmable switching frequency up to 600 kHz to reduce input and output filtering requirements, and minimise the size and number of external filter capacitors and inductors needed. Available in a 32-lead MLPQ package, the new ICs also feature two independently programmable soft-start functions to allow system level sequencing of output voltages in various configurations critical for system level start-up.

The IR3622 family is well suited to multirail applications that require sophisticated power-up and power-down tracking and sequencing of multiple rails by offering a combination of track, sequencing, enable, and 'power good' output features that can be used to trigger a sequential rise of output voltages across multiple POL converters.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

NVDC power-path control to 1– 6 cell battery systems
iCorp Technologies Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.

Read more...
Precise, adaptive battery health-monitoring
RS South Africa Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.

Read more...
Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...
The new role of UPS technology in high-precision automation
Omron Electronics Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.

Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...
Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...
90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...
Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved