Analogue, Mixed Signal, LSI


High output drive, rail-to-rail amplifier

19 September 2007 Analogue, Mixed Signal, LSI

The AS1710 operational amplifier from austriamicrosystems operates from a single +2,7 V to +5,5 V supply and can swing to within 100 mV from the rails while sinking or sourcing 50 mA of output current. Large short time loads common in various applications such as audio amplification are covered with a peak current of >200 mA. The device also features 10 MHz unity gain bandwidth and a 10 V/μs slew rate. It requires only 1,6 mA of supply current and just 1 nA while in shutdown and has a typical input bias current of only 50 pA. The AS1710 is available in a 6-pin SC70 package suitable for operating environments ranging from -40°C to +125°C.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-voltage analog multiplexers
30 September 2020, Altron Arrow , Analogue, Mixed Signal, LSI
Diodes Incorporated announces the PS508 and PS509 analog multiplexers that are capable of switching signal voltages of up to 36 V in an industrial environment. The high voltage capability of the devices ...

Read more...
Low inductance SiC power module gate driver kit
31 August 2020, Altron Arrow , Analogue, Mixed Signal, LSI
The transformation to electrify transportation – from trains, trams and trolleys to buses, automobiles and EV chargers – continues at a rapid pace, as countries shift toward improved modes of transit ...

Read more...
New GaN-on-SiC power amplifiers
31 August 2020, RFiber Solutions , Analogue, Mixed Signal, LSI
MACOM Technology Solutions, a leading supplier of semiconductor solutions, recently announced at the virtual International Microwave Symposium the introduction of its new gallium nitride on silicon carbide ...

Read more...
Boost charger for 2-cell series lithium-ion battery
29 July 2020, NuVision Electronics , Power Electronics / Power Management
The MP2672 from Monolithic Power Systems is a highly integrated, flexible switch-mode battery charger IC for a lithium-ion battery with two cells in series, which is used in a wide range of portable applications. When ...

Read more...
DACs with 1 or 2 channels
31 August 2020, Altron Arrow , Analogue, Mixed Signal, LSI
The MCP47CXBXX/MCP48CXBXX are single- and dual-channel 8-bit, 10-bit and 12-bit buffered voltage output digital-to-analog converters (DAC), with volatile or MTP memory and an I2C/SPI interface. The MTP ...

Read more...
Data buffer for high performance server and cloud service applications
30 September 2020, Hi-Q Electronics , Analogue, Mixed Signal, LSI
Renesas Electronics Corporation has introduced a new high speed, low power DDR5 data buffer for data centre, server and high-performance workstation applications. Advancements over the past few years ...

Read more...
High accuracy inclinometer with machine learning core
30 September 2020, Avnet Silica , Analogue, Mixed Signal, LSI
The IIS2ICLX from STMicroelectronics is a high accuracy, low power, 2-axis digital inclinometer for use in applications such as industrial automation and structural health monitoring. It features a ...

Read more...
Smoke detection matters
30 September 2020, Altron Arrow , Editor's Choice, Analogue, Mixed Signal, LSI
Smoke detection regulations are critically important when the value proposition is as basic as human life itself.

Read more...
Temperature-compensated quartz crystal oscillators
30 September 2020, Hi-Q Electronics , Analogue, Mixed Signal, LSI
With it’s compact, power-saving and highly precise specifications, Jauch’s new TCXO JT21S is particularly suitable for use in wireless applications and ensures a stable frequency across all RF standards ...

Read more...
Microthermal liquid flow sensors
29 July 2020, Electrocomp , Analogue, Mixed Signal, LSI
The SLF3x liquid flow sensor series from Sensirion represents an advancement for microthermal liquid flow sensors. By combining Sensirion’s 20-year track record in low and lowest flow rate sensing with ...

Read more...