Exar introduced two products that it claimed were industry firsts: an I²C/SPI UART with 64-Byte FIFO and integrated RS232 transceiver combination, designated the XR20V2170 (V2170); and a low voltage 1,8 V I²C/SPI UART with 64-Byte FIFO, designated the XR20M1170 (M1170). Both devices target industrial, consumer and battery-powered applications.
The V2170 is a high performance UART with 64 byte TX and RX FIFOs, a selectable I2C/SPI slave interface and RS232 transceiver. It operates from 2,97 V to 3,63 V and offers additional features such as a programmable fractional baud rate generator and 8X and 4X sampling rates that allow for a maximum baud rate of 1 Mbps at 3,3 V. The standard features include 16 selectable TX and RX FIFO trigger levels, automatic hardware (RTS/CTS) and patented software (Xon/Xoff) flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. The device is available in a 40-pin QFN package.
The M1170 UART has 64 byte TX and RX FIFOs, a selectable I²C/SPI slave interface and operates from 1,62 V to 3,63 V. The enhanced features in the XR20M1170 include a programmable fractional baud rate generator, and 8X and 4X sampling rate that allows for a maximum baud rate of 16 Mbps at 3,3 V. The standard features include 16 selectable TX and RX FIFO trigger levels, automatic hardware (RTS/CTS) and software (Xon/Xoff) flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. This device is available in a 28-pin QFN, 24-pin QFN, 16-pin QFN, 24-pin TSSOP and a 16-pin TSSOP.
Quad RF ADC/DAC for wideband transceiver design Altron Arrow
DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.
Read more...High-performance FPGA family EBV Electrolink
DSP, Micros & Memory
AMD’s Kintex UltraScale+ FPGA family delivers high-performance, mid-range field programmable gate arrays that balance price, performance, and power efficiency for demanding DSP applications.
Read more...Compact and scalable development board
DSP, Micros & Memory
The FRDM-MCXW72 from NXP is a compact and scalable development board for rapid prototyping of the MCX W72 multiprotocol wireless MCU.
Read more...High-performance processing for cost-aware industrial IoT Altron Arrow
DSP, Micros & Memory
STMicroelectronics has expanded its industrial processing portfolio with the new STM32MP2 series, a family of application microprocessors designed to deliver higher performance, advanced security and long-term reliability for cost-sensitive industrial IoT systems.
Read more...Development board for secure industrial and IoT applications
DSP, Micros & Memory
The FRDM-i.MX93 Development Board from NXP is a compact, entry-level platform built around the powerful i.MX 93 applications processor, designed to accelerate prototyping and development for industrial, IoT, and edge computing applications.
Read more...KIOXIA pioneer new 3D Flash technology EBV Electrolink
DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.
Read more...Ultra-wide signal capture from a single chip RFiber Solutions
DSP, Micros & Memory
Jariet Technologies developed Electra, a chipset that enables ultra-wide, multi-function and multi-band signal capture and generation from a single component.
Read more...High-performance processing at the edge Altron Arrow
DSP, Micros & Memory
STMicroelectronics’ STM32MP23 microprocessor is designed to meet the demands of industrial, IoT, and edge AI applications.
Read more...Ultra-low-power Arm Cortex MCU with FPU Altron Arrow
DSP, Micros & Memory
STMicroelectronics expanded its STM32 ultra-low-power family with the launch of the STM32U3 for cost-sensitive applications in industrial, medical, and consumer electronics devices.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version