Power Electronics / Power Management


Highly efficient DC-DC regulator

6 February 2008 Power Electronics / Power Management

austriamicrosystems' DC-DC converter portfolio has been expanded with the introduction of the AS1341, an hysteretic 20 V step-down regulator in a small 3 x 3 mm TDFN 8-pin package. The regulator delivers 600 mA at 5,0 V from a 12 V input and can provide adjustable output voltages in the range of 1,25 V to VIN, or fixed at 5 V. The device operates from an input voltage of between 4,5 and 20 V and offers a high efficiency of up to 96%. Additionally, an integrated 100% duty-cycle mode improves efficiency in low dropout conditions. The built-in current limit function can be set to 0,7 or 1,4 A switching current for optimising the converter with respect to the inductor and load. The AS1341's low quiescent current of 12 μA provides good light load efficiency and conserves battery life, while current draw during shutdown is reduced to only 0,8 μA.

ASIC Design Services, +27 (0)11 315 8316, [email protected], www.asic.co.za

NuVision Electronics, +27 (0)11 894 8214, [email protected], www.nuvisionelec.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

GigaDevice expands optical communication portfolio
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
GigaDevice has introduced the new GD32E512 and GD32E252 series MCUs specifically designed for optical module applications.

Read more...
Quality batteries are critical for IIoT
Uniross Batteries Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.

Read more...
12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.

Read more...
40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...
Power modules for solid-state transformers
RS South Africa Power Electronics / Power Management
Microchip’s new 3,3 kV silicon carbide modules deliver the required thermal performance and efficiency for SSTs to increase power available for token generation.

Read more...
Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.

Read more...
Wide range power module
Power Electronics / Power Management
The latest DC-DC modules from Würth Elektronik are characterised by high resilience to voltage transients on the 24 V bus and an extremely wide input-voltage range from 3,5 V to 38 V.

Read more...
Selecting primary batteries for maximum service life
Uniross Batteries Power Electronics / Power Management
Primary batteries play an important role in IoT applications. Designed for longevity, they have a high-energy capacity and are often used in standalone applications where charging is impractical or impossible.

Read more...
4 kW e-mobility DC-DC converter
Brabek Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.

Read more...
Miniature xtal for critical timing
ASIC Design Services Telecoms, Datacoms, Wireless, IoT
Microchip’s EX-423 Evacuated Miniature Crystal Oscillator is a compact, low-power timing solution designed for applications that demand high stability, accuracy, and long-term reliability.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved