|
|
Protected three-phase 600 V gate driver
20 February 2008, Power Electronics / Power Management
International Rectifier has introduced the IRS26302D protected 600 V three-phase gate driver with ground fault protection. The IC has a seventh gate drive channel for a power factor correction (PFC) switch or inverter brake, making it well-suited to medium power appliance motor control and many other general-purpose three-phase inverter applications.
The IRS26302D integrates power MOSFET/IGBT gate drivers with three high-side and three low-side referenced output channels to provide 200 mA/350 mA drive current at up to 20 V MOS gate drive capability operating up to 600 V.
The IC incorporates negative Vs immunity circuitry to protect the system from catastrophic events that can be seen during high-current switching and short-circuit conditions in addition to ground fault protection, critical features for industrial systems that require high levels of robustness and reliability. Also, an advanced input filter has been integrated to reject noise and reduce distortion, improving system performance in many motor control applications.
To address the needs of applications suffering from space constraints and to simplify design, the IRS26302D features integrated bootstrap functionality. This functionality can reduce the bootstrap power supply from six components to three, while providing VBS over-voltage protection for the system through the use of additional integrated intelligent protection circuitry.
Part of IR's G5 HVIC platform, the new IC utilises IR's advanced high-voltage IC process which incorporates next-generation high-voltage level-shifting and termination technology to deliver enhanced electrical over-stress protection and higher field reliability. In addition to the over-current and over-temperature detection input, the IRS26302D features under-voltage lock-out protection, integrated deadtime protection, shoot-through protection, a shutdown input, fault-reporting, and is compatible with 3,3 V input logic. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- Power controller for smart home appliances
28 August 2019, RF Design, Power Electronics / Power Management
Qorvo has introduced a new intelligent power control solution for reducing energy consumption, bulk, weight and noise in smart home appliances, AC-powered fans and compressors. This mixed-signal system-in-package ...
- UPS battery configuration made easy
28 August 2019, Forbatt SA, Power Electronics / Power Management
Determining the UPS (uninterruptible power supply) battery configuration using a formula can be quite complicated and, since many users are not very familiar with it, a more simplified method can be used ...
- Qi-compliant wireless charging coils
28 August 2019, Avnet South Africa, Passive Components
Vishay has expanded its offering of Qi-compliant wireless charging transmitter and receiver coils with the introduction of 14 new products in industry-standard shield sizes.
Consisting of eight single-coil ...
- LED flicker, and how to prevent it
28 August 2019, Avnet South Africa, Opto-Electronics
With the growing popularity of LED lighting, especially now that very cheap LED luminaires are coming to the market, flicker is becoming more of a problem.
Flicker, a repetitive switching on and off ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- 3 Watt DC-DC converters
28 August 2019, Avnet South Africa, Power Electronics / Power Management
Aimtec has introduced three new series of switching regulators – the AMSRB1-78JZ, AMSRL1-78JZ and AMSRL-78JZ – all meeting the EN62368 standard and suitable for IoT (Internet of Things) applications.
The ...
- Isolated PFC module
28 August 2019, Conical Technologies, Power Electronics / Power Management
SynQor has added a new isolated PFC (power factor correction) module to its AeroQor range of products for the airborne electronics market. Featuring highly efficient active power factor correction, the ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- 80 V buck driver for LEDs
26 June 2019, Altron Arrow, Power Electronics / Power Management
Infineon Technologies’ new LED driver, the ILD8150/E, features an innovative hybrid dimming mode technology for achieving 0,5 percent of the target current. With its supply voltage range from 8 V up to ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
|
|
