Analogue, Mixed Signal, LSI


Micro-power 150 kSps ADCs

20 February 2008 Analogue, Mixed Signal, LSI

austriamicrosystems has expanded its micro-power A-D converter family with the new and cost efficient AS1528 10-bit, ultra-low power single-channel fully-differential A/D converter and the AS1529 dual-channel single-ended ultra-low power A/D converter. The devices are well suited to small battery powered devices and portable data acquisition systems such as remote sensors or pen digitisers with tough space requirements. Both devices consume less than 350 μA (at 3 V) at the 150 kSps maximum sampling rate. The advanced automatic shutdown feature places the devices into sleep mode between conversions, significantly reducing power consumption at lower sampling speeds. Power consumption drops to 245 μA at a reduced speed of 100 kSps, further down to 2,5 μA at 1 kSps and to 200 nA during shutdown. The AS1528/29 offer DC performance of ±0,275 LSB for INL and DNL, as well as an ultra-low offset and gain error of ±0,25 LSB combined with dynamic specifications like a THD of


-79,5 dB. SPI, QSPI and a Microwire-compatible interface enable high-speed data access.

ASIC Design Services, +27 (0)11 315 8316, [email protected], www.asic.co.za

NuVision Electronics, +27 (0)11 894 8214, [email protected], www.nuvisionelec.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
ARINC 429 line driver evaluation board
ASIC Design Services DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.

Read more...
Inventec enhances design for manufacturing excellence with Siemens’ software
ASIC Design Services Manufacturing / Production Technology, Hardware & Services
Siemens recently announced that Inventec Corporation has adopted Siemens’ Valor NPI software and Process Preparation X solutions from the Siemens Xcelerator portfolio to strengthen its design-for-manufacturing efficiency.

Read more...
Siemens acquires Canopus AI
ASIC Design Services News
The acquisition extends Siemens’ comprehensive EDA software portfolio with computational metrology and inspection to help chipmakers solve critical technical challenges in semiconductor manufacturing.

Read more...
High-speed Flash for system-on-chip applications
NuVision Electronics DSP, Micros & Memory
GigaDevice unveiled the GD25NE series of dual-power supply SPI NOR Flash chips, designed specifically for 1,2 V SoC applications.

Read more...
High-performance µC series
NuVision Electronics Computer/Embedded Technology
GigaDevice has announced the official launch of the GD32F503/505 high-performance series of 32-bit general-purpose microcontrollers based on the Arm Cortex-M33 core.

Read more...
High power from DC to 6 GHz
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
WAVEPIA’s latest GaN-on-SiC transistor, the WP2806015UH(S), delivers up to 15 W power from DC to 6 GHz at 28 V.

Read more...
High-density planar power for mission-critical systems
NuVision Electronics Power Electronics / Power Management
Vishay’s SGTPL-28 family of planar transformers offer 150 W of output power from a 28 V input forward-converter architecture.

Read more...
Smart IMU for high/low-g acceleration
Altron Arrow Analogue, Mixed Signal, LSI
The ISM6HG256X is a 6-axis intelligent inertial measurement unit that enables smart motion sensing, edge computing, and real-time awareness.

Read more...
Aligning clocks over large distances
ASIC Design Services Test & Measurement
SkyWire technology from Microchip makes it easier to align and compare clocks within nanoseconds across geographic locations.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved