DSP, Micros & Memory


Enhanced 32-bit CISC microcontroller line-up

19 March 2008 DSP, Micros & Memory

Renesas has announced enhancements to its H8SX family of 32-bit CISC (complex instruction set computer) microcontrollers. With the addition of the H8SX/1638 and H8SX/1648 groups, there are a total of eight models featuring a 50 MHz maximum operating frequency, 50 MIPS performance, and comprehensive on-chip peripheral functions. The enhanced family of microcontrollers offers a wide range of products ideal for varied systems in PCs and office automation (OA), digital consumer, and industrial products.

The new models incorporate up to 1 MByte of Flash memory capable of 1-cycle access at the 50 MHz maximum operating frequency. A deep software standby mode has been provided as a first for the H8SX family, enabling standby power consumption to be further reduced.

Five Flash memory capacities of 256, 384, 512 and 768 KBytes, and 1 MByte are available. The H8SX/1638 provides a pin-to-pin, upward compatible 1 MB Flash version to the ROM-less H8SX/1651,1650. The line-up includes 120-pin and 144-pin standard package products, allowing a user to select the ideal model for any of a wide range of systems, from low-end to high-end.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quad RF ADC/DAC for wideband transceiver design
Altron Arrow DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.

Read more...
High-performance FPGA family
EBV Electrolink DSP, Micros & Memory
AMD’s Kintex UltraScale+ FPGA family delivers high-performance, mid-range field programmable gate arrays that balance price, performance, and power efficiency for demanding DSP applications.

Read more...
Compact and scalable development board
DSP, Micros & Memory
The FRDM-MCXW72 from NXP is a compact and scalable development board for rapid prototyping of the MCX W72 multiprotocol wireless MCU.

Read more...
High-performance processing for cost-aware industrial IoT
Altron Arrow DSP, Micros & Memory
STMicroelectronics has expanded its industrial processing portfolio with the new STM32MP2 series, a family of application microprocessors designed to deliver higher performance, advanced security and long-term reliability for cost-sensitive industrial IoT systems.

Read more...
Development board for secure industrial and IoT applications
DSP, Micros & Memory
The FRDM-i.MX93 Development Board from NXP is a compact, entry-level platform built around the powerful i.MX 93 applications processor, designed to accelerate prototyping and development for industrial, IoT, and edge computing applications.

Read more...
KIOXIA pioneer new 3D Flash technology
EBV Electrolink DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.

Read more...
Ultra-wide signal capture from a single chip
RFiber Solutions DSP, Micros & Memory
Jariet Technologies developed Electra, a chipset that enables ultra-wide, multi-function and multi-band signal capture and generation from a single component.

Read more...
High-performance processing at the edge
Altron Arrow DSP, Micros & Memory
STMicroelectronics’ STM32MP23 microprocessor is designed to meet the demands of industrial, IoT, and edge AI applications.

Read more...
High-speed Flash for system-on-chip applications
NuVision Electronics DSP, Micros & Memory
GigaDevice unveiled the GD25NE series of dual-power supply SPI NOR Flash chips, designed specifically for 1,2 V SoC applications.

Read more...
Ultra-low-power Arm Cortex MCU with FPU
Altron Arrow DSP, Micros & Memory
STMicroelectronics expanded its STM32 ultra-low-power family with the launch of the STM32U3 for cost-sensitive applications in industrial, medical, and consumer electronics devices.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved