DSP, Micros & Memory


Large memory, low pin-count MCUs

30 April 2008 DSP, Micros & Memory

A range of new 28- and 44-pin 16-bit devices is available from Microchip, featuring increased memory, performance and enhanced peripherals. The new devices include 10 PIC24H 16-bit microcontrollers offering up to 128 KB of programmable Flash memory, up to 16 KB of SRAM (including 2 KB of dual-port RAM for DMA), two on-chip comparators, a user-selectable 10-bit or 12-bit ADC with up to four Sample and Hold circuits in 10-bit mode, and a realtime clock calendar module. Standard serial communication peripherals include two SPIs, two UARTs and one I C module. The new families are offered in packages as small as 6 x 6 mm, and operate at up to 40 MIPS. The devices feature Peripheral Pin Select, which allows digital peripheral pins to be remapped in order to achieve layout efficiency or access to pin-multiplexed peripherals. They also offer a Parallel Master Port for rapid parallel communication with off-chip resources, such as displays, communication peripherals or memory.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...
Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...
Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...
Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
ARINC 429 line driver evaluation board
ASIC Design Services DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.

Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.

Read more...
Lower-power Thread and BLE connectivity
iCorp Technologies DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved