UniStone is a complete HCI BT 2.0 standard compliant system module which offers enhanced data rate (EDR) and excellent RF performance, among other features. The module is based on the successful BlueMoon UniCelluar IC from Infineon and it is Bluetooth qualified, FCC and R&TTE pre-approved for short time to market.
The shielded module has a small footprint of only 8,7 x 11,6 mm with 54 pads at 1,20 mm pitch and provides support for both leaded and non-leaded soldering processes. The high level of integration of the module means that the only necessary external component is the antenna. The qualified temperature range for the UniStone module is -40 to +85°C thus enabling a wide spectrum of applications in the consumer, industrial and automotive market.
The UniStone module benefits from Bluetooth power class 2 to provide long-range performance, and features adaptive frequency hopping (AFH) and packet loss concealment (PLC), a proprietary algorithm where lost packets are replaced by synthesised packets. Further benefits are integrated firmware in low cost ROM on-chip and an additional patch RAM on-chip for future enhancements and bug fixes.
The module has RF sensitivity of -88 dBm at 0,1% bit-error-rate and has adjustable UART and PCM interface levels from 1,35 V to 3,6 V. It offers extended SCO (eSCO) support, multiple SCO/eSCO links and a WLAN coexistence interface. It also includes a voltage regulator, a 26 MHz crystal oscillator, an EEPROM with unique Bluetooth device address and configuration data for initialisation, and also a balun with filter.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...18 W monolithic microwave amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
printer friendly version