Analogue, Mixed Signal, LSI


Bright LED-based lamps

11 June 2008 Analogue, Mixed Signal, LSI

Signal Construct has enhanced its range of Multi-Star 4-chip LED-based lamps to achieve a brightness which is equivalent to a standard lamp with a power of 3 to 5 Watts.

The previous range of BA9S and E10 type sockets have now been complemented with E14, BA15D and BA15S type sockets with 15 mm diameter and 33 mm depth. The elements are available in voltage ranges from 6 to 230 V, with a choice of seven different colours. With a viewing angle of 160°, they guarantee homogeneous light dispersion.

For lower brightness requirements, single LED elements can be combined with these sockets.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Robust temperature sensor for E-mobility
30 June 2020, Electrocomp , Analogue, Mixed Signal, LSI
The new B58703M1103A* temperature sensor is specially developed for demanding E-mobility applications, which call for high long-term stability. The NTC sensor is designed for a temperature range of -40°C ...

Read more...
Sensor signal conditioning IC
30 June 2020, Hi-Q Electronics , Analogue, Mixed Signal, LSI
New from Renesas Electronics is the ZSSC3240 sensor signal conditioner (SSC) – the newest member of its leading-edge SSC portfolio. The ZSSC3240 delivers high accuracy, sensitivity and flexibility for ...

Read more...
Highly accurate 1-wire temperature sensor
29 April 2020, CST Electronics , Analogue, Mixed Signal, LSI
The MAX31825 temperature sensor from Maxim Integrated provides 8-bit to 12-bit Celsius temperature measurements with better than ±1°C accuracy from 0°C to +70°C and ±1,75°C from -45°C to +145°C. The ...

Read more...
HDMI 2.1 active switch
29 May 2020, Altron Arrow , Analogue, Mixed Signal, LSI
Diodes Incorporated announced the PI3HDX12221, an HDMI 2.1 active switch with linear ReDriver that enables manufacturers of TVs, PCs, gaming consoles and set-top boxes to adopt the latest 12 Gbps HDMI ...

Read more...
Board-mount pressure sensors
29 May 2020, TRX Electronics , Analogue, Mixed Signal, LSI
The ABP series of board-mount pressure sensors from Honeywell are fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, ...

Read more...
The top benefits of MEMS timing
29 May 2020, Avnet South Africa , Analogue, Mixed Signal, LSI
MEMS (micro electromechanical systems), designed to resonate and generate clocks signals, may not dominate the world of timing applications right now, but the technology’s popularity is growing. Competing ...

Read more...
Versatile temperature sensor IC
25 March 2020 , Analogue, Mixed Signal, LSI
Although the WSEN-TIDS temperature sensor from Würth Elektronik measures just 2,0 x 2,0 x 0,5 mm, its range of application is wide. Its accuracy in the measuring range -40°C to 125°C is ±0,5°C, while ...

Read more...
IMUs that carry machine learning burden
29 April 2020, Altron Arrow , Analogue, Mixed Signal, LSI
Designed for use in a wide variety of consumer and industrial applications, STMicroelectronics’ 6-axis iNEMO inertial measurements units (IMU) feature an embedded machine learning core (MLC) to offload ...

Read more...
Versatile temperature sensor IC
29 April 2020 , Analogue, Mixed Signal, LSI
Although the WSEN-TIDS temperature sensor from Würth Elektronik measures just 2,0 x 2,0 x 0,5 mm, its range of application is wide. Its accuracy in the measuring range -40°C to 125°C is ±0,5°C, while ...

Read more...
ADC for harsh industrial environments
25 March 2020, Altron Arrow , Analogue, Mixed Signal, LSI
The ADC120 is a low-power, eight-channel pure CMOS 12-bit analog-to-digital converter (ADC) specified for conversion from 50 KSps to 1 MSps, tested at 1 MSps. The architecture is based on a successive-approximation ...

Read more...