Power Electronics / Power Management


Controllers for intermediate bus converters

23 July 2008 Power Electronics / Power Management

Vishay has released two new controller ICs for intermediate bus converter applications, which integrate 75 V half-bridge MOSFET drivers with a 1,6 A peak current driving capability, as well as a full range of current monitoring and control features. The Siliconix SiP11205 and SiP11206 controllers are designed to work on the primary side of an isolated half-bridge IBC in telecom and network equipment and 1/16 or 1/8 power modules where standard bus voltages such as 48 V need to be converted to 12 V or lower intermediate voltages. They step down voltages with >95% efficiency and handle 100 V transients for 100 ms in compliance with ETSI 300-132-2. Integrated ±1,6 A high-voltage MOSFET drivers allow each IC to drive both the low- and high-side switching devices in a half-bridge converter. The oscillator frequency is programmable from 200 kHz to 1 MHz.

EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reliable power solution
Conical Technologies Power Electronics / Power Management
The Mibbo MLD-120W-xxVx is a robust DIN-rail mounted DC-DC converter with a 120 W output capacity specifically designed for industrial and automation applications.

Read more...
Easing the path for IPPs navigating local energy regulations
Power Electronics / Power Management
Independent Power Producers (IPPs) and developers venturing into South Africa’s renewable energy sector face an onerous and challenging regulatory landscape characterised by uncertainty in securing grid connections and considerable development costs.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
Wide input voltage buck-boost converter
Altron Arrow Power Electronics / Power Management
The MAX77859 from Analog Devices is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range of between 2,5 and 22 V.

Read more...
IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...
High-density power module for AI at the edge applications
Altron Arrow Power Electronics / Power Management
The MCPF1412 power module from Microchip has integrated I2C and PMBus interfaces for flexible configuration and monitoring.

Read more...
Development kit for TI’s SN6507
Power Electronics / Power Management
This comprehensive solution is designed to help engineers evaluate the performance of TI’s SN6507 transformer driver for isolated power supplies.

Read more...
High-voltage IGBT
Hi-Q Electronics Power Electronics / Power Management
Diotec Semiconductor has launched the DIW030M060 IGBT, a 600 V, 30 A device with a built-in reverse diode.

Read more...
DC converter for Hi-Rel applications
Vepac Electronics Power Electronics / Power Management
The MFK2812S from Crane Aerospace & Electronics is a DC-DC converter with an input voltage range of 16 to 50 V and an output of 12 V at up to 2,08 A.

Read more...
Distributed Energy Resource Management Systems
Schneider Electric South Africa Power Electronics / Power Management
In addition to grid stability, DERMS also play a role in energy trading with some countries leveraging DERMS for real-time energy trading.

Read more...