Ramtron has expanded its line of AEC-Q100-specified F-RAM memory devices, qualifying the FM24CL64 64 Kb serial F-RAM to operate over the Grade 3 automotive temperature range of -40 to +85°C. The device is part of Ramtron’s growing family of Grade 1 (+125°C) and Grade 3 AEC-Q100-qualified automotive memory products. The FM24CL64 is already designed into advanced automotive audio platforms in which F-RAM is used to record dynamic data quickly and frequently while maintaining data integrity even upon sudden power loss. The device’s NoDelay writes, virtually unlimited endurance, and low operating currents, coupled with its I²C interface, enable reliable data collection/storage at maximum bus speed and low power in intelligent infotainment applications. The FM24CL64 is a 64Kb non-volatile RAM which operates at 3 volts, draws 75 μA for reads and writes at 100 kHz, and is available in a ‘green’ 8-pin SOIC package.
ESP32-S31 for advanced IoT iCorp Technologies
DSP, Micros & Memory
At the heart of the device is a dual-core 32-bit RISC-V MCU operating at up to 320 MHz, delivering 6,86 CoreMark/MHz performance with MMU support for efficient memory management.
Read more...Cortex-M33 performance for cost-sensitive designs Future Electronics
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics introduces a new generation of entry-level microcontrollers engineered to deliver enhanced processing capability, modern security, and cost-effective scalability for connected embedded applications.
Read more...Memory shortage 2026: Engineering implications for South Africa
DSP, Micros & Memory
[Sponsored] Addressing this challenge requires system-level thinking and adoption with McKinsey Electronics providing the engineering and sourcing framework required to maintain system resilience despite ongoing global constraints.
Read more...Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Battery-friendly Thread and BLE solution iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...Next generation HMI processing platform Future Electronics
DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.
Read more...Low-power SoC for IoT designs iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...Chip for high-density power Future Electronics
DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.
Read more...The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...Cost-efficient wireless MCU Future Electronics
DSP, Micros & Memory
The STMicroelectronics STM32WBA2 is a cost-effective, low-power wireless microcontroller designed for energy-sensitive IoT applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version