Enclosures, Racks, Cabinets & Panel Products


Stainless steel cabinets

12 November 2008 Enclosures, Racks, Cabinets & Panel Products

Legrand’s stainless steel cabinets are designed for use in corrosive conditions and in areas requiring a high level of hygiene.

Atlantic control panel enclosures in 304L stainless steel have a high quality, easy-to-clean brushed stainless steel finish, extra surface protection, stainless steel screws and hinges, as well as rounded doors. These rust-proof units also have a reversible cabinet, a protective flange, double bar locks and a facility where devices like supports or pushbuttons may be attached to the inside of the door. A backplate enables easy installation, as there is no need to drill.

The enclosures are designed for maximum safety and the ordered arrangement and protection of electrical components like terminal blocks, switches and sockets, fuse carriers, safety transformers and circuit breakers. They have an IP66 index protection rating and conform to IEC quality standards. They are available in sizes of between 300 x 200 x 160 mm and 1400 x 800 x 400 mm.

These new cabinets are suited for industries that include mining, paper, chemical, pharmaceutical and petroleum, as well as for use in food manufacturing plants, distilleries, industrial kitchens and dairies. Accessories include plain and perforated plates, modular chassis, internal doors, locking devices and mounting accessories.

Special 316 L stainless steel cabinets are available for use in extremely harsh conditions where acids or halides are continuously present, or offshore, where these units are constantly exposed to chlorides.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Conduction-cooled electronics cases
23 October 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
As electronics and processing systems become smaller and smaller, the need for versatile, compact form-factor cases that allow efficient heat dissipation increases. nVent Schroff offers customisable conduction-cooled ...

Read more...
19-inch lab racks
23 October 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
nVent Schroff’s 19-inch lab racks are designed for laboratory environments, and come in mobile and stationary models. They offer a load-carrying capacity of 200 kg at the centre and a chassis depth of ...

Read more...
18-slot PXI Express chassis
25 September 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
Schroff nVent has expanded its Schroff product range for PXI systems by adding an 18-slot Schroff PXI Express system with a modular structure which is used in complex measuring and simulation applications. The ...

Read more...
Table-top instrument enclosures
25 September 2019, Avnet South Africa , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Plastic enclosures with mounting flange
25 September 2019, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove sealing ...

Read more...
USB and utility plastic boxes
25 September 2019, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Gainta’s G19XX series of utility boxes and USB boxes come in a range of materials and a variety of designs to meet an array of application requirements. The G1901G/G1901C and G1911G/G1911C are ideally ...

Read more...
Die-cast enclosures in extended lengths
25 September 2019, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The 1590 die-cast enclosures family from Hammond Manufacturing consists of 41 different sizes in the standard rectangular and Stomp Box, painted variants. Stomp boxes, colour coded to provide quick ...

Read more...
Digital workflow eases selection of Schroff products
28 August 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
nVent Schroff has a series of coordinated services that simplify and speed up the digital workflow from selection to delivery of Schroff products. Now when users search for products on https://schroff.nvent.com/...

Read more...
Sealed enclosures for industrial electronics
26 June 2019, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...

Read more...
ebm-papst expands AxiBlade fan range
26 June 2019, Ebmpapst South Africa , Enclosures, Racks, Cabinets & Panel Products
Axial fans, which are used in air-conditioning and refrigeration systems such as evaporators, condensers and heat pumps, must fulfil high requirements with regard to air flow, energy efficiency and noise. ...

Read more...