Enclosures, Racks, Cabinets & Panel Products


19" rack enclosures for industrial environments

12 November 2008 Enclosures, Racks, Cabinets & Panel Products

Sarel’s Spacial 3D enclosures have been designed for use in electronics, IT, LAN and communications applications in dirty industrial environments. The protection degree is IP 66 (totally dust-proof and resistant to strong jets of water) and impact resistance is IK 08 (5 Joules).

Two types of enclosures are available: 1- and 2-body. The 1-body enclosures are available either with fixed or swing type 19” rack frames and are 600 mm wide, 400 mm deep and can be ordered in six heights: 300 mm (4U), 400 mm (7U), 500 mm (9U), 700 mm (13U) and 800 mm (16U). The 2-body versions are supplied in the same heights but in depths of either 400 or 500 mm and complete with fixed 19” rack.

The doors have a 4 mm thick safety glass window, are bevelled and double-folded for high rigidity and strength. Excellent sealing is provided by a continuous foamed-in gasket and further enhanced by a gutter profiled and double-folded front of the enclosure body. The enclosures are supplied with a double bar lock and a selection of alternative locking mechanisms such as padlocking handles is available if security is an issue. Cable access is facilitated by gland plates in top and bottom.

The enclosures are fabricated from phosphated, chromate-passivated mild steel, finished with a polyester-based epoxy-modified powder coating, which provides an excellent resistance to weathering, corrosion and mechanical impact.

Accessories include 19” front plates, wall mounting brackets and a full range of ventilation and cooling accessories such as the new Tropico range of filter fans, Peltier and Vortex coolers.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Conduction-cooled electronics cases
23 October 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
As electronics and processing systems become smaller and smaller, the need for versatile, compact form-factor cases that allow efficient heat dissipation increases. nVent Schroff offers customisable conduction-cooled ...

Read more...
19-inch lab racks
23 October 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
nVent Schroff’s 19-inch lab racks are designed for laboratory environments, and come in mobile and stationary models. They offer a load-carrying capacity of 200 kg at the centre and a chassis depth of ...

Read more...
18-slot PXI Express chassis
25 September 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
Schroff nVent has expanded its Schroff product range for PXI systems by adding an 18-slot Schroff PXI Express system with a modular structure which is used in complex measuring and simulation applications. The ...

Read more...
Table-top instrument enclosures
25 September 2019, Avnet South Africa , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Plastic enclosures with mounting flange
25 September 2019, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove sealing ...

Read more...
USB and utility plastic boxes
25 September 2019, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Gainta’s G19XX series of utility boxes and USB boxes come in a range of materials and a variety of designs to meet an array of application requirements. The G1901G/G1901C and G1911G/G1911C are ideally ...

Read more...
Die-cast enclosures in extended lengths
25 September 2019, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The 1590 die-cast enclosures family from Hammond Manufacturing consists of 41 different sizes in the standard rectangular and Stomp Box, painted variants. Stomp boxes, colour coded to provide quick ...

Read more...
Digital workflow eases selection of Schroff products
28 August 2019, Actum Electronics , Enclosures, Racks, Cabinets & Panel Products
nVent Schroff has a series of coordinated services that simplify and speed up the digital workflow from selection to delivery of Schroff products. Now when users search for products on https://schroff.nvent.com/...

Read more...
Sealed enclosures for industrial electronics
26 June 2019, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...

Read more...
ebm-papst expands AxiBlade fan range
26 June 2019, Ebmpapst South Africa , Enclosures, Racks, Cabinets & Panel Products
Axial fans, which are used in air-conditioning and refrigeration systems such as evaporators, condensers and heat pumps, must fulfil high requirements with regard to air flow, energy efficiency and noise. ...

Read more...