Cable assemblies for motors and drives

4 March 2009 Enclosures, Racks, Cabinets & Panel Products

Lapp Group offers a variety of moulded network plug-and-play assemblies for motors and drives, DeviceNet, Ethernet and ControlNet applications.

Lapp offers flexing and static moulded pre-assembled and tested cable/connector assemblies for AB motors and drives. They are ideal for motor/drive interconnection in high motion applications such as in cable track and multi-axis machines. Moulded construction ensures a high quality environmental seal and integral strain relief.

DeviceNet flexing and static moulded cord sets are pre-tested and utilise high quality continuous flex cable with integral moulded strain relief. They are designed to provide interconnection between simple devices, such as sensors and actuators and high level devices, such as PLCs and computers, in high motion applications.

Remote access assemblies provide quick and easy access to PLCs or industrial computers mounted inside control panels located on the factory floor. They provide a power outlet and data cable interface to an external operator device, such as a laptop computer, for uploading or downloading system programs and data. All this is accomplished without the need to open the control panel door or shut down the system. Several interconnection protocols are supported (DH 485, Data Highway, Ethernet, etc). Pre-assembled and tested interface cables are also available.

Flexing Ethernet assemblies are offered as continuous flex CAT5e cable, combined with either RJ45 or M12 circular connectors, which offer a unique solution for motion systems operating in tough industrial environments.

Flexing ControlNet assemblies consist of static or continuous flex coaxial cable and BNC connectors, which provide long lasting performance in industrial applications. These assemblies meet all ControlNet specification requirements for reliable 5 Mbit/sec operation.

For more information contact Grant Joyce, Lapp Cable, +27 (0)11 201 3213, [email protected], www.lappcable.co.za

Further reading:

High visibility 4-digit panel ammeters
Electrocomp Express Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.

Read more...

---

Multi-channel SMPS cable assemblies
RFiber Solutions Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.

Read more...

---

Building the control panels of the future
Omron Electronics Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.

Read more...

---

What’s the big deal with DPL?
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
The dynamic performance layer (DPL) forms a key part of the construction of Nitrowave coaxial cables, Samtec’s range of high-performance RF solutions for microwave and mmWave applications.

Read more...

---

Flexible and high-density heat rejection system
Enclosures, Racks, Cabinets & Panel Products
The introduction of the Vertiv CoolLoop Trim Cooler supports air and liquid cooling applications for high-performance computing.

Read more...

---

AI domain-specific architecture
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
Designing a new product is often an exercise in priorities, carefully balancing a range of capabilities to obtain the best overall result.

Read more...

---

DC to 40 GHz termination
RF Design Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.

Read more...

---

Complete electrical termination solutions for mining
Enclosures, Racks, Cabinets & Panel Products
Unlike other traditional direct-entry flameproof junction boxes that are made from steel, cast iron or aluminium, the Envirobox is made from a specially formulated, robust engineering polymer unique to Pratley, and is completely corrosion resistant.

Read more...

---

Popular aluminium enclosure series expanded
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Gainta has expanded its popular G1xx series of sealed aluminium enclosures which have an IP65 rating to provide protection against dust and moisture.

Read more...

---

Modular sub racks, front panels and modules
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
Vero’s industry-compliant KM6 range is a modular, pluggable, 19-inch rack-based enclosure to securely house and protect electronic equipment.

Read more...

---