Power Electronics / Power Management


HVICs for motor control

4 March 2009 Power Electronics / Power Management

International Rectifier has introduced the IRS260xD family of single-phase high-voltage ICs (HVICs) for motor drive applications including airconditioners, fans, pumps, micro, mini and general purpose inverter drives.

The power MOSFET and IGBT drivers offer optional dependent or independent high- and low-side referenced output channels with a gate drive supply range from 10 V to 20 V. The output drivers feature a high-pulse current buffer stage designed for minimum driver cross-conduction while the floating channel can be used to drive N-channel power MOSFETs or IGBTs in the high-side configuration opera-ting up to 600 V. The devices provide matched propagation delay for both channels and an advanced input filter to improve noise immunity in addition to negative voltage spike immunity to protect the system against catastrophic events during high-current switching and short circuit conditions.

The IRS2607D high- and low-side driver features outputs in phase with inputs and is suitable for both trapezoidal and sinusoidal motor control.

The IRS2608D and IRS2609D half-bridge drivers feature internal 540 ns dead-time. The IRS2608D provides high-side output in phase with HIN input and low-side output out of phase with LIN input and is also suitable for both trapezoidal and sinusoidal motor control. The IRS2609D features high-side output in phase with IN input, and a shut down input to turn off both channels.

The new ICs utilise IR’s advanced high-voltage IC process which incorporates high-voltage level-shifting and termination technology to deliver excellent electrical over-stress protection and high field reliability. The family features under-voltage lock-out protection, integrated deadtime protection, shoot-through protection, a shutdown input and is compatible with 3,3 V input logic.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Setting a new benchmark for high-power DC load testing
Conical Technologies Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.

Read more...
Quality batteries are critical for IIoT
Uniross Batteries Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.

Read more...
12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.

Read more...
40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...
Power modules for solid-state transformers
RS South Africa Power Electronics / Power Management
Microchip’s new 3,3 kV silicon carbide modules deliver the required thermal performance and efficiency for SSTs to increase power available for token generation.

Read more...
Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.

Read more...
Wide range power module
Power Electronics / Power Management
The latest DC-DC modules from Würth Elektronik are characterised by high resilience to voltage transients on the 24 V bus and an extremely wide input-voltage range from 3,5 V to 38 V.

Read more...
Selecting primary batteries for maximum service life
Uniross Batteries Power Electronics / Power Management
Primary batteries play an important role in IoT applications. Designed for longevity, they have a high-energy capacity and are often used in standalone applications where charging is impractical or impossible.

Read more...
4 kW e-mobility DC-DC converter
Brabek Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.

Read more...
Aluminium case upgrade boosts performance
Vepac Electronics Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved