mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Multipurpose power connector
4 March 2009, Interconnection

Designed with the same flat wiping technology as the company’s standard Powerpoles, Anderson Power Products’ Multipurpose Powerpole contact is a make-first/break-last connection when used in a multipole situation with standard 15/45 Powerpoles. The dovetailed housing allows users to interlock multiple housings into vertical or horizontal connector banks specific to individual project requirements.

This connector is rated to 600 V continuous (AC or DC) and up to 35 A. The contact accommodates wire sizes from 10 to 14 AWG (5,3 to 2,1 mm²) and is available in reeled or loose piece to accommodate production needs. The Multipurpose Powerpole uses Anderson’s standard crimp tools and dies.


Credit(s)
Supplied By: Vepac Electronics
Tel: +27 11 454 8053
Fax: +27 11 608 1661
Email: sales@vepac.co.za
www: www.vepac.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • RF coaxial IDC connectors
    28 August 2019, Future Electronics, Interconnection
    AVX has released new wire-to-board RF coaxial IDC connectors for industrial and automotive applications. The initial release of the new 00-6791 Series is comprised of two small, single-piece solutions ...
  • Sealed plastic connectors
    28 August 2019, TRX Electronics, Interconnection
    The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
  • Rugged DC-DC converters
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
  • Balancing performance, speed and cost for rugged interconnects
    25 September 2019, Avnet South Africa, Interconnection
    System designers want the smallest and lightest possible connectors for use in aerospace and military electronics, while industrial and transportation electronics are expected to deal with the same harsh environments at more competitive cost points.
  • Sealed plastic connectors
    25 September 2019, TRX Electronics, Interconnection
    The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
  • Connector module for 4PPoE
    25 September 2019, Webb Industries, Interconnection
    Webb Industries has introduced the new AMJ-S Module 2G from Telegärtner, optimised and redesigned to provide demanding applications with operational reliability under extreme mechanical and electrical ...
  • High-voltage rack-mount PSUs
    25 September 2019, Vepac Electronics, Power Electronics / Power Management
    XP Glassman Power has introduced a series of rack-mount, high-voltage DC power supplies (PSU) able to supply up to 60 kV. Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature ...
  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • Digital fibre-optic sensor
    28 August 2019, Vepac Electronics, Opto-Electronics
    The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides. The slim-line housing with protective lid will fit in a variety ...
  • All-in-one light pipe system
    28 August 2019, Vepac Electronics, Opto-Electronics
    Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed. The all-in-one adaptor system is built with optimum ...
  • Bidirectional laboratory power supply
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
  • DC-DC converter for DIN-rail mounting
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.