19-inch cooling elements

18 March 2009 Enclosures, Racks, Cabinets & Panel Products

New from Elma is a 19-inch cooling fin extrusion with a width of 42 HP and which matches standard height units (U).

Each and every fin is built upon a 1,5 HP pitch (7,62 mm) to guarantee enough space in between for the screw heads. Therefore the fins do not have to be modified for mounting; it is sufficient to drill the holes from the flat side. Hence the cooling fin extrusions can be used directly as front and/or rear panels in cabinets and subracks.

Depending upon customer requests, the cooling fin extrusions can be conductively finished and additional EMC brackets can be mounted onto the sides to guarantee safe contacting with the chassis. This simultaneously provides active heat dissipation and EMC protection.

Elma also offers the possibility to carry out thermoanalysis of cabinets and subracks.Critical configurations can be recognised during the design phase, before the setup of the first prototype begins.

Further reading:

RF shield box to 12 GHz
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
The HDRF-1467-S from RF Electronics has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation.

Read more...

---

High visibility 4-digit panel ammeters
Electrocomp Express Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.

Read more...

---

Multi-channel SMPS cable assemblies
RFiber Solutions Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.

Read more...

---

Building the control panels of the future
Omron Electronics Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.

Read more...

---

What’s the big deal with DPL?
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
The dynamic performance layer (DPL) forms a key part of the construction of Nitrowave coaxial cables, Samtec’s range of high-performance RF solutions for microwave and mmWave applications.

Read more...

---

Flexible and high-density heat rejection system
Enclosures, Racks, Cabinets & Panel Products
The introduction of the Vertiv CoolLoop Trim Cooler supports air and liquid cooling applications for high-performance computing.

Read more...

---

AI domain-specific architecture
Spectrum Concepts Enclosures, Racks, Cabinets & Panel Products
Designing a new product is often an exercise in priorities, carefully balancing a range of capabilities to obtain the best overall result.

Read more...

---

DC to 40 GHz termination
RF Design Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.

Read more...

---

Complete electrical termination solutions for mining
Enclosures, Racks, Cabinets & Panel Products
Unlike other traditional direct-entry flameproof junction boxes that are made from steel, cast iron or aluminium, the Envirobox is made from a specially formulated, robust engineering polymer unique to Pratley, and is completely corrosion resistant.

Read more...

---

Popular aluminium enclosure series expanded
Sivan Electronic Supplies Enclosures, Racks, Cabinets & Panel Products
Gainta has expanded its popular G1xx series of sealed aluminium enclosures which have an IP65 rating to provide protection against dust and moisture.

Read more...

---