Low-voltage EEPROMs

18 March 2009 DSP, Micros & Memory

New from Microchip is a series of I²C EEPROM devices with an operating voltage down to 1,5 V for both read and write operations, and a very low operating current of less than 400 μA. These 1 Kbit and 2 Kbit devices support two different write-protect features: the 24VL014, 24VL024 and 24VL025 can be ordered with a full-array write protect, while the 24VL014H and 24VL024H support a half-array write protect. With an operating frequency of 100 kHz, the EEPROMs can operate in portable and handheld applications with very low voltages, thus reducing power consumption and extending battery life. The devices are supported by the MPLAB starter kit for serial memory products, which includes a board, a serial EEPROM starter pack, a USB cable and a CD containing the MPLAB IDE.

Further reading:

ESP32-S31 for advanced IoT
iCorp Technologies DSP, Micros & Memory
At the heart of the device is a dual-core 32-bit RISC-V MCU operating at up to 320 MHz, delivering 6,86 CoreMark/MHz performance with MMU support for efficient memory management.

Read more...

---

Cortex-M33 performance for cost-sensitive designs
Future Electronics DSP, Micros & Memory
The STM32C5 series from STMicroelectronics introduces a new generation of entry-level microcontrollers engineered to deliver enhanced processing capability, modern security, and cost-effective scalability for connected embedded applications.

Read more...

---

Memory shortage 2026: Engineering implications for South Africa
DSP, Micros & Memory
[Sponsored] Addressing this challenge requires system-level thinking and adoption with McKinsey Electronics providing the engineering and sourcing framework required to maintain system resilience despite ongoing global constraints.

Read more...

---

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...

---

Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...

---

Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...

---

Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...

---

Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...

---

The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...

---

Cost-efficient wireless MCU
Future Electronics DSP, Micros & Memory
The STMicroelectronics STM32WBA2 is a cost-effective, low-power wireless microcontroller designed for energy-sensitive IoT applications.

Read more...

---