75 Ω BNC system for 3G SDI
10 June 2009
Interconnection
The emergence of the 3 Gbps 3G serial digital interface (3G SDI) which enables uncompressed digital transfer of 1080p and digital cinema has once again brought interconnect signal integrity considerations to the forefront of high-speed system design. Samtec has employed its signal integrity expertise to help address these high-speed requirements with the development of a family of BNC connectors optimised for 3G SDI communications.
Samtec’s True75 BNC connectors (BNC7T Series) are a tested and proven 75 Ω ±3 Ω system. They are available in edge mount straight bulkhead jack for 0,062” and 0,093” boards, through-hole straight jack, and through-hole right angle bulkhead jack orientations. Also available is a True75 RG6 coax cable plug (RF6 Series) in straight and right angle orientations.
In addition to high-speed products such as these True75 BNC connectors, Samtec has complete design, manufacturing, testing and verification capabilities for 3G SDI applications as well as reference designs, test data, and Final Inch and Final Launch PCB design tools to help streamline and optimise 3G SDI designs.
Further reading:
Blade terminals deliver greater power density
Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...
What’s the big deal with open pin fields?
Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus
Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.
Read more...
New connector for Push-X technology
Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm
2.
Read more...
Test cable designed for maximum ruggedness
Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...
Safe connection under load
Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...
Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...
Connectors for energy storage systems
Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...
What’s the big deal with open pin fields?
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
mBend cable assemblies
Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
Read more...