Telecoms, Datacoms, Wireless, IoT


LNAs for cellular infrastructure

5 August 2009 Telecoms, Datacoms, Wireless, IoT

Avago has announced two low-noise, high-gain, high-linearity Gallium Arsenide (GaAs) balanced low noise amplifiers (LNAs) for cellular infrastructure applications. The MGA-16516/17516 are housed in a 4 x 4 x 0,85 mm surface mount 16-lead QFN package. The MGA-16516 operates from 500 to 1700 MHz, while the MGA-17516 operates from 1700 to 2700 MHz. They are designed for use with 3 dB hybrid couplers at the input and output of LNAs typically found in the front end of cellular base stations, combiners and transceiver radio cards. In a typical operating environment of 5 V and 50 mA per channel, the MGA-16516 delivers a 0,45 dB noise figure, 17,5 dB gain, 11,5 dBm input third order intercept point (IIP3), and 18 dBm output power at 1 dB compress point (P1dB) at 850 MHz. Under the same operating conditions, the MGA-17516 delivers enhanced performance of 0,52 dB noise figure, 17,2 dB Gain, 13,7 dBm IIP3, and 21,5 dBm output power at P1dB at 1850 MHz.

Future Electronics, +27 (0)21 421 8292, [email protected], www.futureelectronics.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...
Improving accuracy of outdoor devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
In a real-world environment, accessing a direct satellite signal is not always possible, and it cannot be relied upon as the only solution to provide a device with accurate location at all times.

Read more...
New 3dB hybrid couplers
Electrocomp Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.

Read more...
Next-level Software Defined Radio
IOT Electronics Telecoms, Datacoms, Wireless, IoT
Great Scott Gadgets has announced the HackRF Pro, a powerful evolution of its popular Software Defined Radio (SDR) platform designed for engineers and enthusiasts.

Read more...
High-performance Zigbee and BLE module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The KCMA32S from Quectel boasts an ARM Cortex-M33 processor with a frequency of up to 80 MHz, and supports Zigbee 3.0, BLE 5.3 and BLE mesh.

Read more...
Championing local PCB manufacturing
Master Circuits Telecoms, Datacoms, Wireless, IoT
Master Circuits, founded in 1994 by Peter Frankish in Durban, was born from the vision to meet the growing local demand for quick-turnaround printed circuit boards in South Africa.

Read more...
How IoT-driven smart data helps businesses stay ahead
Trinity IoT Telecoms, Datacoms, Wireless, IoT
With around 19 billion IoT devices globally, embedded in everything from machinery to vehicles to consumer products, reliable data is plentiful.

Read more...
IoT-optimised LTE Cat 1 bis module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel’s EG915K-EU is an LTE Cat 1 bis wireless communication module specially designed for M2M and IoT applications.

Read more...
New SiC power MOSFET
Future Electronics Power Electronics / Power Management
STMicroelectronics’ SCT012H90G3AG is a robust, automotive-grade SiC MOSFET, engineered for demanding power electronics, featuring a 900?V drain-source voltage and exceptionally low on-resistance of 12?mO at 60?A.

Read more...
Chip provides concurrent dual connectivity
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved