Enclosures, Racks, Cabinets & Panel Products


Extensive cabinet range offers flexibility

2 September 2009 Enclosures, Racks, Cabinets & Panel Products

Elen Enclosures offers one of the largest ranges of standard suite cabinets available: the Sarel Series 6000 which comprises 62 basic sizes ranging from 1200 mm to 2200 mm high, 300 mm to 1600 mm wide and 400 mm to 800 mm deep industrial cabinets. The modular design of the range allows further expansion of possible sizes and combinations. The cabinets can easily and quickly be combined into suites and can also be joined ‘back-to-back’. They can be supplied with lockable front and rear doors with or without safety glass windows or with fixed rear cover.

An extensive range of accessories, such as fixed and swing type 19” rack frames (full or partial), distribution board conversion kits, fixed and telescopic shelves, control desk and keyboard attachments, compartments and partial doors, busbar chambers and systems, steel, perforated or DIN-rail chassis systems, etc, is available.

The extendable construction comprises four uprights (highly rigid triangular profiles) linked to welded top and bottom frames. Both uprights and frames are perforated on a 25 mm pitch for fixing of accessories and cabinet joining brackets. Standard cladding comprises 1,5 mm thick steel doors with reinforcing frames and/or 1,5 mm thick rear cover. Versions with 2 mm thick doors are available. Plinths are either modular or monoblock and cable gland plates are available either full or 2- and 3-part, ie, for applications where back-to-back chassis are used within one cabinet – typically in PLC/DCS systems where the control is installed in front of the cabinet and marshalling at the rear.

Locking systems, hinges and side/rear cover fittings are all outside the protected area further eliminating the risk of ingress of dust and liquids into the cabinets. Cladding (doors, side, rear and top covers) are provided with joint-less, injected type foam gaskets. Rating is IP 55 (low pressure hose water-proof and dust-proof); IK-10.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Enclosures for small table-top instruments
30 September 2020, Avnet Abacus , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Enclosures for mounting electronic applications
30 September 2020, Sivan Electronic Supplies , Enclosures, Racks, Cabinets & Panel Products
Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove ...

Read more...
Stylish new plastic enclosure family
30 September 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Electronics has announced its new 1557 family. Initially available in four plan sizes, each in two heights, it is available in polycarbonate sealed to IP68 and ABS designed to meet IP66. The sizes ...

Read more...
Range of DIN rail enclosures
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
The CNMB range of DIN rail enclosures provides a diverse selection of modular housings which are available in eight set lengths. They are optimised for a wide range of electrical and electronics industries ...

Read more...
Rittal’s range of compact and small enclosures
30 September 2020 , Enclosures, Racks, Cabinets & Panel Products
After more than 50 years and 35 million enclosures sold, Rittal has introduced its small and compact enclosures in the form of the AX and KX series. According to managing director of Rittal South Africa, ...

Read more...
Versatile rack cases
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
Rack cases are a key building block of rack mounting systems, enabling electronic, electric and electro-mechanical sub-systems and assemblies to be mounted easily in any standard 19” enclosure. For ...

Read more...
Industrial enclosures in stainless steel
31 August 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The IP66 EJSS family from Hammond Electronics is available in 304 or 316 grade stainless steel, supplied as standard in a natural smooth brushed finish. Sealed to IP66, the EJSS is designed for use as ...

Read more...
Navigating EMI challenges in next-generation railway technology
31 August 2020, Actum Group , Enclosures, Racks, Cabinets & Panel Products
The advent of new-age connectivity, such as 5G networks and LTE, has enabled railway systems to process higher volumes of data digitally, which has significantly improved operational safety, efficiency ...

Read more...
DIN rail enclosures
30 June 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has announced its 1597DIN family of UL94-V0 flame-retardant plastic enclosures for mounting to standard IEC/EN 60715 35 mm DIN rails for applications such as industrial control equipment, ...

Read more...
Company profile: Rittal
30 June 2020, Rittal , Enclosures, Racks, Cabinets & Panel Products
Rittal was founded by Prof. Friedhelm Loh in 1961 in Herborn, Germany. The enclosure specialist forms part of a larger family-owned group called the Friedhelm Loh Group. Today, the company has 10 000 ...

Read more...