mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

High-frequency coaxial connectors
11 November 2009, Interconnection

Hirose’s MS-166 connector has been developed for inspection of high-frequency circuits used in portable terminals. Verification of the circuit performance is accomplished by simply inserting the external plug in the board-mounted receptacle. This action redirects the circuit from its normal condition to the plug side.

To meet with the demand for miniaturisation, the connector has a low profile of only 1,2 mm with an area of 5,29 mm². Other benefits include high-frequency performance and solder wicking prevention which is achieved with nickel barrier areas that prevent the travel of solder into the contact area. The connector is also RoHS compliant.

Plugs, receptacles and a variety of SMA conversion adapters are available within the range. These are suited for portable terminals, ETC, notebook computers, Bluetooth, wireless LAN, POS terminals, GPS terminals, PDAs and other small devices.

For more information contact Barry Culligan, Otto Marketing, +27 (0)11 791 1033, contact@otto.co.za, www.otto.co.za


Credit(s)
Supplied By: Otto Marketing
Tel: +27 12 803 7373
Fax: +27 12 803 7374
Email: nelina@ottomarketing.co.za
www:
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Compression lugs and splices
    26 June 2019, TRX Electronics, Interconnection
    Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications. The connectors are designed for use with many different code and flex conductor ...
  • Test point pins
    26 June 2019, Vepac Electronics, Interconnection
    The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
  • Pin strips for KNX applications
    26 June 2019, Wiltron Agencies, Interconnection
    The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
  • High-temperature FFC/FPC connectors
    26 June 2019, Otto Marketing, Interconnection
    Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
  • Modular fibre-optic patch panel
    26 June 2019, Webb Industries, Interconnection
    The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
  • High-speed M12 connectors for transportation
    29 May 2019, Webb Industries, Interconnection
    Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
  • Board-to-board connectors
    29 May 2019, TRX Electronics, Interconnection
    A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm. The Fine Pitch series ...
  • Durable board-to-board connector
    29 May 2019, Otto Marketing, Interconnection
    Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain. While ...
  • Coax-to-PCB connectors
    29 May 2019, TRX Electronics, Interconnection
    Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
  • Wire-/board-to-board connectors
    29 May 2019, TRX Electronics, Interconnection
    Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
  • Choosing the right connector for harsh environments
    30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
    While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
  • Connectors 101 for lighting designers
    30 April 2019, Avnet South Africa, Interconnection
    Selecting the best connector for a lighting application is a matter of matching application requirements to available connectors, with proper consideration given to performance and costs.

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.