|
|
Tool-less PCB terminal carries 76 A
11 November 2009, Interconnection
The PLH 16 is a new high-performance PCB terminal from Phoenix Contact, employing a one-hand release lever principle. The patented push-lock spring permits a 16 mm² conductor – either with or without ferrule – to be connected without any tools. The solid or flexible conductor is inserted into the open terminal point and is reliably closed by actuating the release lever via the push-lock spring. Alternatively, the conductors can be directly inserted with the lever closed using the push-in system.
Three versions are available in order to support different voltages. The compact zigzag arrangement of the solder pins in a 10 mm pitch with an unrestricted 600 V UL component certification (1000 V according to VDE) is especially space saving. In order to ensure correct connections, colour coding is possible from pin to pin. For more information contact Sean Hadley, Phoenix Contact, +27 (0)11 801 8200, seanh@phoenixcontact.co.za, www.phoenixcontact.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Compression lugs and splices
26 June 2019, TRX Electronics, Interconnection
Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications.
The connectors are designed for use with many different code and flex conductor ...
- Test point pins
26 June 2019, Vepac Electronics, Interconnection
The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
- Pin strips for KNX applications
26 June 2019, Wiltron Agencies, Interconnection
The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
- High-temperature FFC/FPC connectors
26 June 2019, Otto Marketing, Interconnection
Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
- Modular fibre-optic patch panel
26 June 2019, Webb Industries, Interconnection
The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
- High-speed M12 connectors for transportation
29 May 2019, Webb Industries, Interconnection
Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
- Board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm.
The Fine Pitch series ...
- Durable board-to-board connector
29 May 2019, Otto Marketing, Interconnection
Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain.
While ...
- Coax-to-PCB connectors
29 May 2019, TRX Electronics, Interconnection
Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
- Outdoor housings in compact format
29 May 2019, Phoenix Contact, Enclosures, Racks, Cabinets & Panel Products
The outdoor housings of the Phoenix Contact ECS series are now also available in a more compact design. The shorter installation depth of 109 mm – instead of 169 mm – is especially suitable for space-critical ...
- Wire-/board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
- Choosing the right connector for harsh environments
30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
|
|
