New from Laird Technologies are the enhanced BTM410/411 and BTM420/421 Bluetooth radio modules. The devices are designed for data applications and are fully integrated, sub-miniature Bluetooth data-oriented modules based on a market leading chipset. Incorporating a full Bluetooth stack and supporting serial port profile (SPP), the modules provide a UART interface and a comprehensive AT command set to allow an easy interface to a host processor.
The Bluetooth modules support the latest BT2.1 + EDR, SSP, SPP, SCO and eSCO specifications, and also meet FCC/IC/CE standards. With physical sizes as small as 12,5 x 18,0 mm and low-power operation, they are suitable for applications where designers need both performance and miniature size. For flexibility in systems integration, the modules are designed to support a separate power supply for I/O.
The BTM410 supports an external antenna whereas the BTM411 incorporates an onboard, high-performance ceramic chip antenna. The modules are fully qualified as Bluetooth end products, allowing designers to integrate them within their own products with no further Bluetooth qualification. The BTM420/421 modules use the same sub-miniature format, but support a USB HCI interface and are pre-approved as Bluetooth controller subsystems. The BTM420 module supports an external antenna whereas the BTM421 module incorporates an onboard, high-performance ceramic chip antenna.
Smart farming with LoRaWAN Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Real-time visibility is transforming modern agriculture, and Otto Wireless Solutions, together with Dragino, deliver this capability through a comprehensive suite of long-range IoT sensors and gateways designed for smart farming.
Read more...RTK-enhanced GNSS and INS solution Dizzy Enterprises
Telecoms, Datacoms, Wireless, IoT
This latest XSENS MTi-8 Click provides high-accuracy positioning (RTK-supported) and orientation tracking in demanding outdoor embedded applications.
Read more...High-performance double balanced RF mixer RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The AM5008 from Mercury Systems is a high-performance, double-balanced MMIC mixer designed for wideband applications spanning 2 GHz to 24 GHz.
Read more...Compact NFC antennas enable easy integration
Telecoms, Datacoms, Wireless, IoT
Leankon has expanded its 13,56 MHz NFC antenna portfolio with a comprehensive suite of nine off the shelf products designed for next generation IoT applications.
Read more...Ultra-low jitter clocks Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.
Read more...Efficient Bluetooth SoC Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The EFR32BG29 wireless SoC from Silicon Labs is a highly efficient, high memory, low-power, and ultra compact SoC designed for secure and high-performance wireless networking for IoT devices.
Read more...Minimal size, maximum flexibility Würth Elektronik eiSos
Telecoms, Datacoms, Wireless, IoT
Würth Elektronik has introduced two highly compact radio modules that give developers maximum freedom in designing proprietary wireless solutions that go beyond standard protocols.
Read more...HackRF Pro advances Open SDR performance IOT Electronics
Telecoms, Datacoms, Wireless, IoT
Designed for engineers, researchers, and radio enthusiasts alike, the HackRF Pro can transmit and receive signals across a wide frequency range of 100 kHz to 6 GHz, making it a versatile tool for testing and developing modern and emerging radio technologies.
Read more...Deterministic high-speed Ethernet
Telecoms, Datacoms, Wireless, IoT
The Fraunhofer Institute for Photonic Microsystems IPMS has developed a new 10G TSN endpoint IP Core, enabling deterministic real-time communication at data rates of up to 10 Gbit/s.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version