|
|
Power entry modules
28 April 2010, Interconnection
Tyco Electronics has added the CU series to its family of Corcom power entry modules. The new series includes smaller-sized versions of switched filtered and unfiltered power inlets, which are ideal for applications with panel space constraints, in particular systems designed for the popular 1U (1 3/4 inch) height equipment racks.
The CU series offers 15 filtered and eight unfiltered versions to cover a broad array of applications. Shrouded quick-connect terminals eliminate the need for soldered connections, which helps reduce installation time. The series allows higher system efficiency by contributing less heat – making it suitable for applications with power or cooling limitations.
The modules offer three different mounting styles: flush-mount, flange and snap-in. Current ratings range from 1 to 15 A and the product is UL recognised, CSA certified and VDE approved. The 15 A versions, tested by Underwriters Laboratories, are VDE approved for a 10 A rating. The CU series power entry modules are well suited for consumer and computer electronics, telecommunication, data communication and compact industrial applications. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Compression lugs and splices
26 June 2019, TRX Electronics, Interconnection
Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications.
The connectors are designed for use with many different code and flex conductor ...
- Test point pins
26 June 2019, Vepac Electronics, Interconnection
The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
- Pin strips for KNX applications
26 June 2019, Wiltron Agencies, Interconnection
The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
- High-temperature FFC/FPC connectors
26 June 2019, Otto Marketing, Interconnection
Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
- Modular fibre-optic patch panel
26 June 2019, Webb Industries, Interconnection
The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
- High-speed M12 connectors for transportation
29 May 2019, Webb Industries, Interconnection
Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
- Board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm.
The Fine Pitch series ...
- Durable board-to-board connector
29 May 2019, Otto Marketing, Interconnection
Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain.
While ...
- Coax-to-PCB connectors
29 May 2019, TRX Electronics, Interconnection
Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
- Wire-/board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
- Choosing the right connector for harsh environments
30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
- Connectors 101 for lighting designers
30 April 2019, Avnet South Africa, Interconnection
Selecting the best connector for a lighting application is a matter of matching application requirements to available connectors, with proper consideration given to performance and costs.
|
|
