Avago has developed a new four-channel pluggable parallel optic QSFP transceiver module for 40 Gigabit Ethernet applications.
The module is fully compliant to the IEEE 802.3ba 40GBASE SR4 specification and provides a solution for multilane data communication and interconnect applications that integrate four independent 10 Gbps data lanes in each direction to provide 40 Gbps aggregate bandwidth. In addition to 40 Gbps Ethernet interconnects, this transceiver can be used in datacom/telecom switch and router connections, as well as data aggregation and backplane applications.
With data rates of 10 Gbps for up to 100 metres using OM3 fibre, the transceiver is designed to operate over multimode fibre systems using a nominal wavelength of 850 nm. The electrical interface uses a 38-contact edge type connector while the optical interface uses either an 8 or 12 fibre MTP (MPO) connector. The module also provides enhanced electro-optical performance to enable low jitter required for high-speed computing, server clustering, Infiniband and Ethernet switching and core routers. Additionally, this transceiver is hot pluggable for ease of installation and servicing, and backward compatible with 5 and 2,5 Gbps per channel applications.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...General-purpose MCU with RISC-V architecture EBV Electrolink
DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.
Read more...AI-native IoT platform launched EBV Electrolink
AI & ML
These highly-integrated Linux and Android SoCs from Synaptics are optimised for consumer, enterprise, and industrial applications and deliver an ‘out-of-the-box’ edge AI experience.
Read more...Serial SRAM up to 4 MB EBV Electrolink
DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.