Dual stack edge card system
4 August 2010
Interconnection
Samtec has introduced a new high-speed edge card socket that accepts two PCB cards. The connector accommodates two 1,6 mm thick PCB cards.
This 0,8 mm pitch system, in a right angled configuration, allows dual stacked cards at an industry standard 7 mm spacing between cards.
The Edge Rate dual stack edge card socket (DSEC series) is available with 30, 40 or 50 Edge Rate contacts per row. This rugged contact system is optimised for high signal integrity and impedance control, high cycles, reduced broadside coupling and low insertion/withdrawal force. Lead-free solder charge terminations for easy board processing are standard with tin-lead solder charges available as an alternative option. Additional card spacings and an elevated single-card system are also available.
In addition to this right angle dual stack system, Samtec offers Edge Rate contact edge card sockets in surface mount and edge mount designs for parallel, perpendicular and planar board mating. Right angle, edge mount and vertical stamped contact sockets in 0,635 mm and 1 mm pitches are also available.
For more information contact Samtec, +27 (0)11 452 8112, [email protected], www.samtec.com
Further reading:
Prefitted junction box solutions
Interconnection
Prepopulated junction boxes in popular terminal configurations, such as single- and three-phase, enhance convenience for both electrical wholesalers and contractors.
Read more...
Bulgin unveils new range of sustainable connectors
Avnet Abacus
Interconnection
The Standard Vitalis Buccaneer range of waterproof connectors is a bio-based alternative to Bulgin’s flagship series, the Standard Buccaneer, offering the same technical performance with improved sustainability.
Read more...
Possible copper cable crisis looms as global demand soars
Interconnection
With the world requiring up to 3 billion metric tons of copper by 2050 to support green energy transitions and developing nations’ infrastructure, far exceeding the 23 million metric tons mined in 2024, pressure on supply chains is mounting.
Read more...
High-reliability spring-loaded interconnects
Spectrum Concepts
Interconnection
These springs from Mill-Max are drop-in replacements for the standard springs, requiring no changes to the form or fit of the existing spring-loaded pins.
Read more...
Anoison PCB mount connectors for high-performance applications
Conical Technologies
Interconnection
With its wide selection, Anoison provides PCB mount connectors that combine precision, durability, and cost-effectiveness across industries.
Read more...
Connectors for the Smart Factory
Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...
Mouser shares expert design solutions for advanced robotics development
Interconnection
Mouser Electronics has announced a new interactive eBook, ‘The Electric Workforce’, in collaboration with electronics manufacturer and connectivity innovator, Molex.
Read more...
Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
Read more...
Reliable photovoltaic adapter set
Phoenix Contact
Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.
Read more...
Liquid cooling connectors improve thermal management
Startech Industrial
Interconnection
The leak-free design and high flow rate of both series from Amphenol make the connectors ideal for high-reliability equipment that employ liquid cooling.
Read more...
printer friendly version