PC/104 analog I/O cards
15 September 2010
Computer/Embedded Technology
Two new PC/104-compatible analog I/O cards have been developed by WinSystems. The PCM-MIO-G-AD-1 is a 16-channel, 16-bit analog input card and the PCM-MIO-G-DA-1 is an 8-channel, 12-bit analog output card. Both cards also support 48 lines of digital I/O.
These small (90 x 96 mm) expansion boards are designed to meet customer requirements for accurate analog and digital I/O over a -40°C to +85°C temperature range. They are designed for industrial, medical, security, transportation and Mil/COTS applications. Based upon Linear Technologies’ precision converters and voltage references, these cards do not require calibration, which results in quick, easy setup, as well as eliminating the necessity for readjustment and recalibration to installed units in the field.
The input ranges for the PCM-MIO-G-AD-1 are 0–5 V, ±5 V, 0–10 V and ±10 V. Two independent, 16-bit A/D converters support up to 16 single-ended or eight differential channels or various combinations of both. The conversion speed is 100 KSps. The PCM-MIO-G-DA-1 has eight independent, 12-bit D/A converters on board. The output voltage ranges are 0-5 V, 0-10 V, ±5 V, and ±10 V. All output channels are programmable and can be updated and cleared individually or simultaneously.
Both boards have 48 lines of digital I/O individually programmable for input, output or output with read-back. The lines are TTL compatible and can sink 12 mA which supports direct connection to optically isolated AC and DC signal conditioners. Both cards are supplied with free drivers for C, Linux and Windows XP Embedded.
Further reading:
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...
QuecPi smart development board
iCorp Technologies
Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.
Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.
Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.
Read more...
Computing in industrial environments
Vepac Electronics
Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.
Read more...
DDR5 DRAM series
Vepac Electronics
Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.
Read more...
Generate waveforms at 10 GS/s
Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...
Quad-port 10GBASE-T controller
Rugged Interconnect Technologies
Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.
Read more...
HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.
Read more...
IoT gateways
Brandwagon Distribution
Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.
Read more...