Anderson Power Products has developed the SPEC Pak (sealed power for environmental connections) connector series, designed for use wherever a rugged or waterproof signal and ground interconnect solution is required. The seal on the connector shell is rated to IP68, protecting the Powerpole contacts and housings enclosed within the shell from dust and water.
The customer-configured SPEC Pak connectors are suitable for use in mass transportation, off-road vehicles, factory automation, oil and petrochemical exploration, solar and agricultural equipment applications, among others. The core technology within the connector is the Powerpole, a proven reliable technology that accommodates wire ranging from 0,25 to 4 mm². Housed within a fingerproof or standard housing, Powerpole contacts are capable of power, ground as well as signal.
Powerpole’s broad selection of standard and finger proof housings meet UL1977, Section 10.2, and the colour-coded housings offer versatility for design flexibility. The 4-position SPEC Pak shell handles up to 25 A when fully loaded, and the 6-position SPEC Pak shell handles up to 45 A. The SPEC Pak panel mount receptacle utilises an industry standard panel cut-out, size 20 shell for the 4-position and size 24 shell for the 6-position.
RF shield box to 12 GHz Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
The HDRF-1467-S from RF Electronics has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation.
Read more...DC converter for Hi-Rel applications Vepac Electronics
Power Electronics / Power Management
The MFK2812S from Crane Aerospace & Electronics is a DC-DC converter with an input voltage range of 16 to 50 V and an output of 12 V at up to 2,08 A.
Read more...New connector for Push-X technology Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.
Read more...Test cable designed for maximum ruggedness Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...Safe connection under load Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...Connectors for energy storage systems Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...New compact AC-DC PSU series Vepac Electronics
Power Electronics / Power Management
COSEL has announced the expansion of its medical power offering with the addition of the new UMA series, the first three models being the 30 W UMA30F, the 60 W UMA60F and the 120 W UMA120F.
Read more...mBend cable assemblies Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
printer friendly version