|
|
Soldering station
11 May 2011, Manufacturing / Production Technology, Hardware & Services
Hakko has developed the new FX-888 soldering station and packed it with new technology to improve its performance over the preceding 936 model. These advancements have provided up to a 30% increase in operator productivity due to improved thermal performance and faster thermal recovery time. Required workbench space has also been reduced by roughly 35%.
The soldering station features an adjustable temperature control with lock/set screw to vary the temperature between 200°–480°C. The unit is able to maintain idle temperature within 1°C and its ceramic heating element and sensor ensure rapid heat-up temperature and fast thermal recovery. For more information contact Edwin Brown, Vepac Electronics, +27 (0)11 453 1910, sales@vepac.co.za, www.vepac.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- 4-channel PC-based oscilloscope
28 August 2019, Vepac Electronics, Test & Measurement
The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
- Digital fibre-optic sensor
28 August 2019, Vepac Electronics, Opto-Electronics
The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides.
The slim-line housing with protective lid will fit in a variety ...
- All-in-one light pipe system
28 August 2019, Vepac Electronics, Opto-Electronics
Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed.
The all-in-one adaptor system is built with optimum ...
- Hybrid surface mounters
28 August 2019, Zetech, Manufacturing / Production Technology, Hardware & Services
Yamaha’s S10 and S20 i-Pulse 3D hybrid surface mounters, featuring enhanced support for MIDs (moulded interconnect devices), were developed under the concept of a single-unit manufacturing centre designed ...
- Dual-syringe dispenser
28 August 2019, Test & Rework Solutions, Manufacturing / Production Technology, Hardware & Services
Techcon announced the release of its new 50 ml dual-syringe dispenser designed for hassle-free dispensing of 50 ml dual syringes.
The system can accommodate conveniently packaged 50 ml side-by-side ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- SMT test points and terminal pins
31 July 2019, Vepac Electronics, Interconnection
Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- The only constant is change
31 July 2019, Microtronix Manufacturing, Manufacturing / Production Technology, Hardware & Services
Blatant tender rigging and wholesale corruption poses one of the biggest threats to us achieving arguably the single most important and critical requirement in the revival and rejuvenation of our country’s prospects through job creation.
- All in space is not rocket science
31 July 2019, Elmatica, Manufacturing / Production Technology, Hardware & Services
Elmatica, a Norwegian printed circuit board (PCB) broker that established an office in South Africa last year, has assisted a newcomer to the space satellite scene to put its satellites into space.
|
|
