mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Voltage dividers
11 May 2011, Passive Components

Offering higher precision than typical discrete SMT chips, devices in the ORNV series combine five resistors, including two voltage dividers and a reference resistor, in a 4 by 5 mm, eight-pin surface-mount network.

With a 1,27 mm pitch and 1,73 mm maximum seated height, the ORNV series is optimised for precision voltage divider and operational amplifier applications in industrial, telecommunications, process control, and medical instrumentation and equipment. The parts provide a resistance range from 2 kΩ to 50 kΩ with a wide ratio range. They have power ratings of 100 mW at +70°C per resistor, low noise of < -30 dB, low voltage coefficients of < 0,1 ppm/V, and a temperature range of –55°C to +125°C. Offering lead-free or lead terminations, the devices are compliant with RoHS directive 2002/95/EC.

For more information contact Marian Ledgerwood, Future Electronics, +27 (0)21 421 8292, marian.ledgerwood@futureelectronics.com, www.futureelectronics.com


Credit(s)
Supplied By: Future Electronics
Tel: +27 21 421 8292
Fax: 086 623 4522
Email: craig.hemmes@futureelectronics.com
www: www.futureelectronics.com
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Big is beautiful: The benefits of large capacitors
    28 August 2019, Passive Components
    The capacitor is a prime example of a component where small is not always beautiful, as meeting electrical characteristics and safety demands means that a component small enough to solder directly onto ...
  • Qi-compliant wireless charging coils
    28 August 2019, Avnet South Africa, Passive Components
    Vishay has expanded its offering of Qi-compliant wireless charging transmitter and receiver coils with the introduction of 14 new products in industry-standard shield sizes. Consisting of eight single-coil ...
  • Rugged PFC capacitors
    28 August 2019, Electrocomp, Passive Components
    TDK’s DeltaCap X Black Premium is a new series of Epcos MKD capacitors for power factor correction (PFC). With rated voltages of between 440 V a.c. and 850 V a.c., the capacitors with an internal delta ...
  • LAN transformers for industrial Ethernet interfaces
    28 August 2019, Würth Elektronik eiSos, Passive Components
    Würth Elektronik eiSos is expanding its LAN transformer range with the WE-LAN AQ, designed for the elevated requirements in the industrial sector. It can be used in applications requiring up to 1000Base-T ...
  • Power inductors for LED headlights
    28 August 2019, Electrocomp, Passive Components
    TDK has expanded its lineup of metal core power inductors with the new SPM-VT series that is designed especially for the high thermal and current demands of automotive LED headlights. These wire-wound ...
  • Ferrite magnetic design tool
    26 June 2019, Electrocomp, Passive Components
    The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
  • Shielded power inductors
    31 July 2019, RF Design, Passive Components
    High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR). The inductors in the XAL7050 ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • High-current shielded power inductors
    26 June 2019, Electrocomp, Passive Components
    The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...
  • Shielded power inductors
    26 June 2019, RF Design, Passive Components
    High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR). The inductors in the XAL7050 ...
  • Time-to-digital converter
    29 May 2019, Future Electronics, Analogue, Mixed Signal, LSI
    ams has introduced the AS6500, a new high-resolution time-to-digital converter (TDC) featuring CMOS inputs and compact packaging for use in space- and cost-constrained applications. It can measure time ...
  • Automotive qualified chip resistors
    29 May 2019, Electrocomp, Passive Components
    Bourns announced the introduction of its new sulphur-resistant, AEC-Q200 compliant thick film chip resistor series. The new Model CRxxxxA-AS series is available in eight different footprints from small ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.