Further reading:

• Compression lugs and splices
  26 June 2019, TRX Electronics, Interconnection
  Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications. The connectors are designed for use with many different code and flex conductor ...
  
• Test point pins
  26 June 2019, Vepac Electronics, Interconnection
  The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
  
• Pin strips for KNX applications
  26 June 2019, Wiltron Agencies, Interconnection
  The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
  
• High-temperature FFC/FPC connectors
  26 June 2019, Otto Marketing, Interconnection
  Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
  
• Modular fibre-optic patch panel
  26 June 2019, Webb Industries, Interconnection
  The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
  
• High-speed M12 connectors for transportation
  29 May 2019, Webb Industries, Interconnection
  Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
  
• Board-to-board connectors
  29 May 2019, TRX Electronics, Interconnection
  A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm. The Fine Pitch series ...
  
• Durable board-to-board connector
  29 May 2019, Otto Marketing, Interconnection
  Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain. While ...
  
• Coax-to-PCB connectors
  29 May 2019, TRX Electronics, Interconnection
  Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
  
• Wire-/board-to-board connectors
  29 May 2019, TRX Electronics, Interconnection
  Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
  
• Choosing the right connector for harsh environments
  30 April 2019, TRX Electronics, This Week's Editor's Pick, Interconnection
  While connectors are sometimes left to last in a system design, they are essential components, and you need to get their selection right.
  
• Connectors 101 for lighting designers
  30 April 2019, Avnet South Africa, Interconnection
  Selecting the best connector for a lighting application is a matter of matching application requirements to available connectors, with proper consideration given to performance and costs.