mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

SMD power inductors
8 June 2011, Passive Components

TDK-EPC has released the SPM6530-H SMD power inductor series with an extended temperature range. The new parts are now rated for temperatures of up to 125°C and currents up to 28,5 A.

The components are thus suitable for automotive use as choke coils in the DC-DC converters of brake systems, headlights and engine control units (ECU).

Because applications in automotive electronics are exposed to severe environmental conditions, the heat resistance properties of the new series has been greatly improved over those of existing products, which are used as choke coils in notebook PCs and servers. The SPM6530-H inductor can be used over a broad temperature range from -40°C to +125°C. The coil features a solid body made from a high saturation flux density metallic material. The 6,5 mm square coil achieves the same DC superimposition characteristics as a 10 mm square ferrite coil, thus allowing the new inductor to be made smaller and lighter. In addition, its lead-frame design offers enhanced mechanical stability and high dimension accuracy.


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Sealed enclosures for industrial electronics
    26 June 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
    Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • High-current shielded power inductors
    26 June 2019, Electrocomp, Passive Components
    The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...
  • Shielded power inductors
    26 June 2019, RF Design, Passive Components
    High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR). The inductors in the XAL7050 ...
  • Miniaturised CO2 sensor
    29 May 2019, Electrocomp, Analogue, Mixed Signal, LSI
    Thanks to new energy standards and better insulation, buildings have become increasingly energy efficient, but at the cost of accelerated deterioration in air quality. Since high CO2 levels compromise ...
  • PPTC resettable fuses
    29 May 2019, Electrocomp, Circuit & System Protection
    The Bourns Multifuse product line has added the new 8 V and 6 V rated Model MF-FSML/X series of low-resistance, surface-mount polymer positive temperature coefficient (PPTC) resettable fuses. The new ...
  • High-power resettable fuses
    29 May 2019, Electrocomp, Circuit & System Protection
    Bourns has introduced its new 3425 (8764 metric) size, surface-mount MF-GSMF series of Multifuse polymer PTC resettable fuses, beginning with model MF-GSMF300/36X-2. The initial model has higher voltage ...
  • Automotive qualified chip resistors
    29 May 2019, Electrocomp, Passive Components
    Bourns announced the introduction of its new sulphur-resistant, AEC-Q200 compliant thick film chip resistor series. The new Model CRxxxxA-AS series is available in eight different footprints from small ...
  • Is the supply chain broken?
    30 April 2019, Electrocomp, Diel Met Systems, ExecuKit, NuVision Electronics, RF Design, This Week's Editor's Pick, News
    The world’s insatiable demand for electronic goods has created a monster: a supply chain that spans the globe and relies on the entirety of our collective knowledge and experience in the pursuit of industry.
  • Inductor learning kit
    30 April 2019, Würth Elektronik eiSos, Passive Components
    Co-developed by Würth Elektronik eiSos and Texas Instruments, the TI-PMLK Buck Würth Elektronik Edition is a learning kit to autonomously study the impact of magnetics in a power supply using a buck board ...
  • Hybrid over-voltage protectors
    30 April 2019, Electrocomp, Circuit & System Protection
    The brand new GMOV line of over-voltage protection components from Bourns combines the company’s patented, space-saving FLAT gas discharge tube (GDT) technology with a metal oxide varistor (MOV) to create ...
  • Stacked patch antenna for GNSS
    30 April 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
    Molex’s high-accuracy stacked patch GNSS (global navigation satellite system) antenna features a 50 Ω impedance rating, 2 W RF power rating, and below -10 dB return loss. It offers optimised signal processing ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.