FPC connectors
17 August 2011
Interconnection
In view of the continuing trend of miniaturisation in the consumer devices market, TE Connectivity has developed 0,25 mm pitch flexible printed circuit (FPC) connectors.
The new connector boasts a box-shaped, back-flip lock actuator and a lower contact point. With a back-flip lock, the connector accommodates a pick-and-place nozzle, is easy to actuate and has better printed circuit retention. The robust, box-shaped actuator also protects the connector and makes it easy to operate.
The most important feature of the new connectors is that they are designed to accept a printed circuit at an angle rather than horizontally, to enable more flexibility in PCB design. Traditionally, FPC connectors only allowed for horizontal printed circuit insertion. Because of this, it was impossible to mount other components in front of the connectors. As a result, FPC connectors are almost always mounted at the edge of PCBs, which is not always the most convenient location.
For more information contact TE Connectivity, +27 (0)41 503 4500, [email protected], www.te.com
Further reading:
Prefitted junction box solutions
Interconnection
Prepopulated junction boxes in popular terminal configurations, such as single- and three-phase, enhance convenience for both electrical wholesalers and contractors.
Read more...
Bulgin unveils new range of sustainable connectors
Avnet Abacus
Interconnection
The Standard Vitalis Buccaneer range of waterproof connectors is a bio-based alternative to Bulgin’s flagship series, the Standard Buccaneer, offering the same technical performance with improved sustainability.
Read more...
Possible copper cable crisis looms as global demand soars
Interconnection
With the world requiring up to 3 billion metric tons of copper by 2050 to support green energy transitions and developing nations’ infrastructure, far exceeding the 23 million metric tons mined in 2024, pressure on supply chains is mounting.
Read more...
High-reliability spring-loaded interconnects
Spectrum Concepts
Interconnection
These springs from Mill-Max are drop-in replacements for the standard springs, requiring no changes to the form or fit of the existing spring-loaded pins.
Read more...
Anoison PCB mount connectors for high-performance applications
Conical Technologies
Interconnection
With its wide selection, Anoison provides PCB mount connectors that combine precision, durability, and cost-effectiveness across industries.
Read more...
Connectors for the Smart Factory
Spectrum Concepts
Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.
Read more...
Mouser shares expert design solutions for advanced robotics development
Interconnection
Mouser Electronics has announced a new interactive eBook, ‘The Electric Workforce’, in collaboration with electronics manufacturer and connectivity innovator, Molex.
Read more...
Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.
Read more...
Reliable photovoltaic adapter set
Phoenix Contact
Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.
Read more...
Liquid cooling connectors improve thermal management
Startech Industrial
Interconnection
The leak-free design and high flow rate of both series from Amphenol make the connectors ideal for high-reliability equipment that employ liquid cooling.
Read more...
printer friendly version