Interconnection


Connectors with 1,27 mm pitch

9 November 2011 Interconnection

Amphenol’s new TMM range of contact spacing connectors is designed for wire-to-wire and board-to-board interconnections in a wide range of industrial and telecoms applications.

The parts have a 1,27 mm pitch contact spacing and are available in 12 circuit sizes that encompass parts with between four and 26 poles. Copper alloy contacts are fully tinned to protect against corrosion and kinked to enhance connector retention whilst soldering takes place. Locking latches are available on female connectors.

TMM connectors have current and voltage ratings of 1 A and 230 V respectively. Contact resistance is 20 mΩ (max), and the red thermoplastic bodied UL 94 V0 rated parts have an insulation resistance of 1000 MΩ (min) and a withstand voltage of 500 V a.c. Operating temperature range is -40°C to +105°C.

For more information contact Electrocomp Express, 0860 10 20 20, [email protected], www.eexpress.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Prefitted junction box solutions
Interconnection
Prepopulated junction boxes in popular terminal configurations, such as single- and three-phase, enhance convenience for both electrical wholesalers and contractors.

Read more...
Bulgin unveils new range of sustainable connectors
Avnet Abacus Interconnection
The Standard Vitalis Buccaneer range of waterproof connectors is a bio-based alternative to Bulgin’s flagship series, the Standard Buccaneer, offering the same technical performance with improved sustainability.

Read more...
Possible copper cable crisis looms as global demand soars
Interconnection
With the world requiring up to 3 billion metric tons of copper by 2050 to support green energy transitions and developing nations’ infrastructure, far exceeding the 23 million metric tons mined in 2024, pressure on supply chains is mounting.

Read more...
High-reliability spring-loaded interconnects
Spectrum Concepts Interconnection
These springs from Mill-Max are drop-in replacements for the standard springs, requiring no changes to the form or fit of the existing spring-loaded pins.

Read more...
Anoison PCB mount connectors for high-performance applications
Conical Technologies Interconnection
With its wide selection, Anoison provides PCB mount connectors that combine precision, durability, and cost-effectiveness across industries.

Read more...
Connectors for the Smart Factory
Spectrum Concepts Interconnection
[Sponsored] Designing networks for the smart factory can seem daunting, but the solutions are already available with Samtec providing a comprehensive range of interconnect technologies tailored to the demands of the modern factory.

Read more...
Mouser shares expert design solutions for advanced robotics development
Interconnection
Mouser Electronics has announced a new interactive eBook, ‘The Electric Workforce’, in collaboration with electronics manufacturer and connectivity innovator, Molex.

Read more...
Explosive zone connectors
Interconnection
The connector series design by Glenair is optimised for fast and easy crimp-contact wire termination, with ample wiring space in the cable housing and accessory hardware.

Read more...
Reliable photovoltaic adapter set
Phoenix Contact Interconnection
Phoenix Contact’s PV-AS-MC4/6-150-MN-SET1 is a high-performance photovoltaic adapter set designed to bridge SUNCLIX connectors with MC4 connectors.

Read more...
Liquid cooling connectors improve thermal management
Startech Industrial Interconnection
The leak-free design and high flow rate of both series from Amphenol make the connectors ideal for high-reliability equipment that employ liquid cooling.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved