Test & Measurement


Temperature and pressure sensors

8 February 2012 Test & Measurement

Following the market launch of the SHT2x family of humidity and temperature sensors, Sensirion has now released a sensor designed exclusively for temperature measurement, as well as a line of differential pressure sensors.

The new STS21 temperature sensor is based on the same chip as the SHT2x family and is housed in a DFN package measuring 3 x 3 mm. It delivers accuracy of ±0,22°C over the temperature range of 5°C to 60°C, combined with very low power consumption. It is pin and protocol compatible with the standard SHT21 humidity sensor, which allows it to be used as alternative to the SHT21 in applications where temperature measurement is required and humidity measurement is optional, since the same hardware can be used with both sensors. The STS21 is fully calibrated and provides a digital output.

For differential pressure sensing, the new SDP6x6 sensor line features low energy consumption, making it suitable for long-term battery operation. The SDP606 and SDP616 sensors are designed to enter sleep mode after performing each measurement. Operating currents are no greater than 400 μA, and this falls to less than 1 μA in sleep mode.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact 1250 V choke solution
Electrocomp Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.

Read more...
Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...
Compact vector network analyser
Vepac Electronics Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.

Read more...
Smart digital fibre sensor
Avnet Abacus Test & Measurement
Panasonic Industry Europe has introduced the new FX-250 digital fibre sensor designed to support users in their daily working routines as effectively as possible.

Read more...
Compact USB spectrum analyser solution
Vepac Electronics Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.

Read more...
B&K Precision’s Series 1820B frequency counter
Comtest Test & Measurement
These compact and versatile instruments are designed for a wide range of frequency measurement applications, from telecommunications to verification and validation of oscillators.

Read more...
How transition-edge sensors detect microwave radiation
Test & Measurement
The elegant interplay of superconductivity, thermal physics, and precision electronics makes TES technology a cornerstone of modern low-energy photon detection.

Read more...
Compact high precision magnetometer
Future Electronics Test & Measurement
Bosch Sensortec has introduced the BMM350, a compact 16-bit, 3-axis magnetometer engineered to deliver high accuracy, low noise, and exceptional energy efficiency in space constrained designs.

Read more...
Ultra compact NTC thermistors
RS South Africa Test & Measurement
Murata Manufacturing Co. has expanded its compact NCU03 series of NTC thermistors with two ultra-small 0603M devices tailored for consumer and automotive designs.

Read more...
Omniflex uses LoRaWAN to track water usage
Omniflex Remote Monitoring Specialists Test & Measurement
Omniflex has helped New South Wales Ports improve its ability to track water usage by installing remote monitoring to 38 water meters at its Port Kembla site, sending the data to the NSWPorts web portal.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved