|
|
4G mobile hotspots
21 March 2012, Telecoms, Datacoms, Wireless, IoT
Designed to take advantage of high-speed mobile broadband connectivity offered by new 4G networks, Sierra Wireless’ AirCard 753S and AirCard 754S Mobile Hotspots connect up to five Wi-Fi enabled devices simultaneously to the Internet over dual-carrier HSPA+ and LTE networks, respectively.
The devices are about the size of a deck of cards, lightweight and easy to set up and use; with no software to install, the average user can be connected in less than one minute. An integrated LCD display provides all the necessary information, including WiFi access information, battery life, network signal strength, and the number of devices connected. Audible alerts and an intuitive web interface also provide easy monitoring of device status. The web interface, which can be accessed from any common web browser, provides an intuitive way for users to change the hotspot’s administrative and security settings.
In areas where 4G network coverage is not available, both models automatically switch over to 3G networks, ensuring continuous connectivity and roaming across network boundaries. The vastly improved speeds offered by 4G networks provide users with plenty of bandwidth, even when shared across multiple devices. The AirCard 753S offers downlink speeds of up to 42 Mbps and uplink speeds of up to 5,76 Mbps on a DC-HSPA+ network. The AirCard 754S offers downlink speeds of up to 100 Mbps and uplink speeds of up to 50 Mbps when operating on an LTE network. For more information contact Gyula Wendler, Arrow Altech Distribution, +27 (0)11 923 9600, gwendler@arrow.altech.co.za, www.arrow.altech.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Impedance and potentiostat front end
26 June 2019, Altron Arrow, Analogue, Mixed Signal, LSI
A new electrochemical and impedance measurement front end has been developed by Analog Devices to enable the next generation of vital sign monitoring devices and intelligent electrochemical sensors.
The ...
- Bluetooth LE pass-through module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
- Positioning module for autonomous driving
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- Automotive smart hub ICs
26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
- ‘Industry’s fastest’ 12-bit ADC
26 June 2019, Altron Arrow, Analogue, Mixed Signal, LSI
Texas Instruments introduced a new ultra-high-speed analog-to-digital converter (ADC) with what it claims are the industry’s widest bandwidth, fastest sampling rate and lowest power consumption. The ADC12DJ5200RF ...
- Wideband amplifier for instrumentation
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Positioning and cellular antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide.
Made ...
- RF power doubler
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
- Ka-band power amplifier
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications.
With the addition of this new ...
- Crystal oscillators for automotive systems
26 June 2019, Altron Arrow, Analogue, Mixed Signal, LSI
Mercury Electronics Europe has announced a new range of wide operating temperature crystal oscillators that are suitable for use in automotive applications.
The new surface mount HY series offers 15 ...
- Flexible wideband antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
- High-frequency power dividers
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications.
The lineup consists of 17 new ...
|
|
