Opto-Electronics


PIN photodiodes

4 April 2012 Opto-Electronics

Vishay is broadening its optoelectronics portfolio with the introduction of new high-speed silicon PIN photodiodes with high radiant sensitivity and fast switching times in clear- and black-epoxy T1 plastic packages. Offering 3 mm lenses, the TEFD4300 and TEFD4300F feature a high reverse photo current of 17 μA and a ±20° angle of half sensitivity.

The devices are optimised for data transmission, photo interrupters, optical switches, encoders and position sensors in metering applications. For infrared and visible light sources, the TEFD4300 is a clear epoxy device with a sensitivity range of 350 nm to 1120 nm. For light sources in the infrared wavelength range of 770 nm to 1070 nm, the TEFD4300F is a black epoxy device with a daylight blocking filter matched with 850 nm to 950 nm IR emitters.

The photodiodes offer fast switching times down to 10 ns at low load resistor values, a low 0,1%/K temperature coefficient of light current, temperature range of -40°C to +100°C, and a 950 nm wavelength of peak sensitivity. The devices are package matched with the VSLB3940, TSUS4300, and TSAL4400 IR emitter series. The photo detectors support lead-free processing in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...