PIR sensor interface ICs

18 April 2012 Analogue, Mixed Signal, LSI

Since LSI/CSI’s LS6506R PIR sensor interface IC is designed to drive a latching relay, it can be used in a wall switch configuration (no Neutral available) to enable the full AC mains cycle to be applied across any load, rendering the wall switch suitable for driving all types of resistive and inductive loads including incandescent lamps, fluorescent lamps, electronic and magnetic transformers, motors, etc.

A sister chip, the LS6507R, drives a triac in series with the load and is suitable to be used in a lower-cost wall switch configurations to drive incandescent lamp loads. For home and commercial occupancy sensor applications, the ICs can be used in wall switch configurations to manually or automatically switch loads on and off. For commercial applications, a feature is offered where the lights can be manually switched off and will remain off as long as motion is detected, allowing for uninterrupted Powerpoint presentations, for example.

Other features include five timeout selections ranging between 30 seconds and 30 minutes; three operating modes; on-chip voltage regulator; PIR sensitivity adjustment; ambient light override control; LED indication for motion detection; 50 Hz/60 Hz operation.

Further reading:

Ultra-low power MEMS accelerometer
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.

Read more...

---

BT Audio 4 Click board
Dizzy Enterprises Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.

Read more...

---

Precision MEMS IMU modules
Altron Arrow Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.

Read more...

---

MEMS with embedded AI processing
Altron Arrow Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.

Read more...

---

High-performance IMU
RS South Africa Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.

Read more...

---

High-temperature closed-loop MEMS accelerometer
RS South Africa Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.

Read more...

---

Dual accelerometers on the same die
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.

Read more...

---

Dual-range IMU with edge processing
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.

Read more...

---

High-reliability isolation amplifiers
EBV Electrolink Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.

Read more...

---

Mibbo QT2C Series signal isolators
Conical Technologies Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.

Read more...

---