High-speed ESD protector

30 May 2012 Circuit & System Protection

The new ESD7004 from ON Semiconductor is specifically designed to preserve signal integrity in high-speed applications such as USB 3.0 (5 Gbps) and eSATA (up to 6 Gbps). The device offers an ultra low 0,4 pF rating, while maintaining extremely low ESD clamping voltage.

As high-speed interfaces exceed 5 Gbps, a few tenths of a picofarad capacitance can have a major effect on the signal integrity of the data being transmitted. By lowering the capacitance down to 0,4 pF typical (0,5 pF maximum) the ESD7004 offers an ESD protection solution that has virtually no effect on eye diagrams of USB 3.0 at 5 Gbps and eSATA at 6 Gbps. In addition, these parts maintain less than 1 db insertion loss at over 8 GHz during S21 measurements, ensuring negligible effect on high-speed data transmission.

Utilising ON Semiconductor’s patented ESD protection silicon which incorporates innovative isolation techniques, the ESD7004 boasts clamping voltages at 11,4 V or less during transmission line pulse (TLP) ±8 A testing which safeguards chipsets using small geometries and low voltage tolerances, common for high-speed datalines. An ESD rating of 15 kV contact per the IEC61000-4-2 standard and low turn-on resistance during ESD events ensures that the most sensitive chipsets will be safe from ESD threats.

The IC is offered in the uDFN 2,5 x 1,0 x 0,5 mm 10-pin package which integrates four lines of protection in a flow-through routing pinout that enables board designers to route traces easily with minimal impact to impedance matching.

Further reading:

Clearing the Static: Staying grounded: Ensuring effective ESD control
Actum Electronics Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...

---

Clearing the Static: ESD component safety in storage and transportation
Actum Electronics Circuit & System Protection
Conductive containers create a Faraday cage effect, safely channelling electrostatic charges away from the components inside.

Read more...

---

Clearing the Static: Conductive foot, heel and shoe grounders
Actum Electronics Circuit & System Protection
Conductive foot, heel and shoe grounders are used in electrostatic discharge protected areas to provide a path to ground for static electricity.

Read more...

---

LED driver for industrial power supply indication
Altron Arrow Editor's Choice Circuit & System Protection
A simple and small solution for driving an LED to provide visual feedback in the presence/absence of a system’s power using a chip not originally designed for this purpose.

Read more...

---

Clearing the Static: Cleaning in an ESD-protected area
Actum Electronics Circuit & System Protection
Cleaning in a protected electrostatic discharge area is a critical task to maintain the integrity of sensitive electronic components and prevent damage caused by static electricity.

Read more...

---

Clearing the Static: Key principles of ESD control in electronics manufacturing
Actum Electronics Circuit & System Protection
Effectively managing electrostatic discharge is essential in electronics manufacturing to ensure not only product reliability, but also worker safety.

Read more...

---

Clearing the Static: Three steps for a dry ESD packaging system
Actum Electronics Circuit & System Protection
For optimal storage, it’s essential to complete the dry-packaging system by adding Desiccant Packs and Humidity Indicator Cards.

Read more...

---

Ensuring safety with earth leakage protection
NewElec Pretoria Circuit & System Protection
Earth leakage protection helps mitigate the risks of electric shocks, fires, and equipment damage by swiftly identifying faults and disconnecting the power supply, thus safeguarding both human lives and machinery.

Read more...

---

Suppressing EMI with filters
Vepac Electronics Circuit & System Protection
EMI/RFI filters play an important role in reducing the high-frequency noise that is generated by various electrical and electronic devices.

Read more...

---

Patch attenuates like a shielding cabinet
Würth Elektronik eiSos Circuit & System Protection
Würth Elektronik has launched its hybrid WE-EMIP EMI absorber sheet, a convenient solution for reducing electromagnetic interference by up to 40 dB.

Read more...

---