PC/104-Plus power supply
27 June 2012
Computer/Embedded Technology
WinSystems announced its PPM-DC-ATX, a PC/104-Plus DC-DC power supply for PC/104, EPIC and EBX single board computers (SBCs) that support ATX power controls.
It features a wide voltage input range from 10 to 50 V, which allows the unit to operate with 12, 24 or 48 V battery-operated or distributed DC power systems.
The board generates five regulated DC output voltages from one common DC input, plus supports the software controlled shutdown and power monitoring for SBCs with advanced CPU chipsets employing sleep modes and active power management. Also, the unit can operate in a +85°C ambient temperature environment using normal convection cooling and no fan.
The PPM-DC-ATX employs a variety of synchronous and asynchronous, single and multiphase, buck and buck-boost topology DC-DC converters. The outputs are +5 V @ 10 A, +3,3 V @ 10 A, +12 V @ 3 A, -12 V @ 500 mA and +5 VSTBY @ 2 A. Each output is short circuit protected and current limited. A minimum load is not needed to bring the supply into regulation. When power is applied to the board, five LEDs will illuminate to provide visual feedback that power is available.
The ATX mode signals PS_ON# and PWR_ON are supported. There is also a connector for an ON/OFF switch for remote shutdown of the system; however, the standby +5 V source will continue to be active. For other accessories such as disk drives, there are two 4-pin connectors at the edge of the board to provide +5 V and +12 V. There is also a microATX connector that allows the +5 V, +3,3 V, +12 V, -12 V, and +5 VSB DC voltages plus the PS_ON and PWR_OK control signals to be brought off-board.
The board measures 90 x 96 mm, is RoHS-compliant, and can operate over an industrial temperature range of -40° to +85°C.
For more information visit www.winsystems.com
Further reading:
Intelligent video processing
Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies
Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.
Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...
Arrival of the Epic-PTH9
Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design
Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.
Read more...
An industry-first Android 16 smart module solution
RF Design
Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.
Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow
Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.
Read more...
Unleash the next generation of Intel Core power
Vepac Electronics
Computer/Embedded Technology
The EPIC-BTS9 from AAEON, is tailor-made to bring unprecedented performance to smart manufacturing and industrial robotics.
Read more...
QMC series I/O modules for VITA 93 small form factor mezzanine
Rugged Interconnect Technologies
Computer/Embedded Technology
The new line of VITA 93 QMC mezzanine modules, from Acromag, are engineered to meet increasing demands for smaller form factors and more performance.
Read more...
MIKROE celebrates 2000th Click board
Computer/Embedded Technology
MIKROE has launched its 2000th Click board, the RTC 27 Click, designed for low-power real-time clock and calendar functionality, time tracking, alarm event generation, watchdog timing, and timestamp capture.
Read more...
printer friendly version