Passive Components


Chip resistor design kits

27 June 2012 Passive Components

Vishay introduced four new engineering design kits for its AEC-Q200-qualified D/CRCW e3 thick film chip resistors. Designed to help engineers select the perfect resistor for their application, the kits offer the commercial-off-the-shelf (COTS) devices in 0402, 0603, 0805 and 1206 case sizes and a wide variety of resistance values, conveniently taped in strips and individually labelled and packaged.

The four new design kits feature E96 series resistance values from 10 Ω to 1 MΩ (every fourth value) – in addition to a 0 Ω jumper – for 122 different values each. The resistors provide tolerance of ±1%, TCR of ±100 ppm/K, power dissipation (P70) from 0,063 W to 0,25 W, and limiting element voltage from 50 V to 200 V.

The D/CRCW e3 resistors are relevant for automotive, industrial equipment, telecom infrastructure, consumer and computer applications. They are compliant to RoHS directive 2011/65/EU and halogen-free according to the IEC 61249-2-21 definition.

For more information contact Dirk Venter, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Coupled inductor for high-performance applications
Passive Components
This coil with MnZn core is characterised by its high permeability and extremely low RDC values, which achieves excellent power density and very high efficiency.

Read more...
Wide input voltage buck-boost converter
Altron Arrow Power Electronics / Power Management
The MAX77859 from Analog Devices is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range of between 2,5 and 22 V.

Read more...
High-density power module for AI at the edge applications
Altron Arrow Power Electronics / Power Management
The MCPF1412 power module from Microchip has integrated I2C and PMBus interfaces for flexible configuration and monitoring.

Read more...
When it comes to long-term reliability of RF amplifier ICs, focus first on die junction temperature
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
When considering the long-term reliability of integrated circuits, a common misconception is that high package or die thermal resistance is problematic. However, high or low thermal resistance, by itself, tells an incomplete story.

Read more...
High-performance processor for edge-AI
Altron Arrow DSP, Micros & Memory
The STM32MP23 microprocessor from STMicroelectronics is the latest addition to the STM32MP2 series, designed to meet the demands of industrial, IoT, and edge AI applications.

Read more...
6 GHz power amplifier
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ ADPA1116 is a 0,3 to 6 GHz GaN-based power amplifier with a saturated output power (POUT) of 39,5 dBm.

Read more...
STM releases innovative GNSS receiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics recently introduced the Teseo VI family of global navigation satellite system receivers aimed at high-volume precise positioning use cases.

Read more...
Integrated STM32WBA6 wireless microcontrollers
Altron Arrow DSP, Micros & Memory
Cost-efficient and highly integrated embedded controllers for emerging 2,4 GHz wireless applications in smart home, health, factory, and agriculture.

Read more...
Ultra-low-power MCU with FPU Arm Cortex-M33
Altron Arrow DSP, Micros & Memory
STMicroelectronics has expanded its STM32 ultra-low-power family with the launch of the STM32U3 for cost-sensitive applications in industrial, medical, and consumer electronics devices.

Read more...