Analogue, Mixed Signal, LSI


ICs for digital voice communication

25 July 2012 Analogue, Mixed Signal, LSI

CML Microcircuits recently introduced the DuraTALK family of digital voice products, consisting of a wide range of flexible technologies supporting voice-data generation, coding, transcoding, decoding, storage and scrambling functions for digital communication systems.

The CMX608, CMX618 and CMX638 ICs are designed for RALCWI, a CML-owned, low bit rate (2400 bps) vocoder technology that facilitates the transmission and reception of highly compressed voice over inherently noisy narrowband radio channels. RALCWI offers flexible, highly integrated, high-performance vocoders, with near toll-quality voice at very low bit rates.

The CMX8341 digital PMR baseband processor system-in-a-chip is aimed at low-cost, licence-free digital PMR (dPMR) radios conforming to the ETSI standard, TS 102 490, and analog PMR (legacy mode).

Seen as the digital successor to PMR446, digital PMR is now a proven technology targeting highly functional solutions by using low-cost and low-complexity technology. dPMR is a narrowband (6,25 kHz) FDMA technology that is 100% digital and offers many forms of voice and/or data applications. RALCWI in digital PMR will provide savings in cost, size and power consumption.

For CVSD/PCM/ADM, flexible coders and decoders are available for analog-to-digital and digital-to-analog voiceband conversion. The CMX639 and CMX649 address this market segment, providing robust and flexible coding algorithms, low cost, low power and small size, ideal for use in a wide variety of consumer, military and business digital voice applications.

The CMX7261 is a single-chip G.711/G.729A/CVSD full duplex multi-transcoder device, capable of encoding analog voice into linear, µ-law or A-law PCM, CVSD or G.729A data formats. It is capable of decoding PCM, CVSD and G.729A back to analog voice. It can also transcode data between PCM, CVSD and G.729A.

The flexible IC creates toll quality speech for applications such as software-defined radio (SDR), voice-over IP (VoIP), wireless private branch exchange (PBX) and privacy type digital voice communications.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-temperature closed-loop MEMS accelerometer
RS South Africa Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.

Read more...
Dual accelerometers on the same die
Altron Arrow Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.

Read more...
Dual-range IMU with edge processing
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.

Read more...
High-reliability isolation amplifiers
EBV Electrolink Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.

Read more...
Mibbo QT2C Series signal isolators
Conical Technologies Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.

Read more...
IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...
Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.

Read more...
Precision JFET op-amp
Altron Arrow Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...
High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved