LED power supplies
5 September 2012
Power Electronics / Power Management
Following the launch of the APV/APC-12/16 series, Mean Well has introduced the new 25 W/35 W LED power supplies of the APV/APC-25/35 series. Operating in constant-voltage (APV) or constant-current (APC) mode, these four new series employ a non-PFC design in order to keep costs low and to provide users more alternatives while designing the lighting fixtures.
With high-frequency switching topology, the models feature 90–264 V a.c. input range and possess up to 84% efficiency, allowing them to function between -30°C and +70°C using free air convection.
The 25 W models are not potted while the 35 W ones are semi-potted for PCB protection and provide the basic ability of anti-moisture, anti-dust as well as for heat conduction purposes. Built-in standard functions include short circuit, overload, over-voltage and 300 V a.c. surge input withstand for 5 seconds.
With IP30 rating, these new power units are suitable for indoor LED lighting without the need for high-level waterproofing and dustproofing. Typical applications include LED indoor lighting, LED-based decorative lighting and LED electrical displays.
Further reading:
Rugged railway-grade DC-DC power modules
iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...
Four-quadrant regenerative grid simulator
Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...
90 W PSU with 150% boost capability
Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...
Standalone USB PD controller
Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...
Power module enhances AI data centre power density
Altron Arrow
Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.
Read more...
MIL-Spec DC-DC power converters
Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...
Compact power MOSFET for high current switching
Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...
DC link capacitors for demanding applications
RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...
N-channel power MOSFETs
TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...
Smart power protection, simplified
TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
Read more...