BVM offers the cPC1000, a modular CompactPCI enclosure, available in many different user-defined configurations. Its vertical format and light weight make it particularly suitable for portable applications such as test systems.
Fully hot-swap compliant to Rev3.0, the cPC1000 is fitted with either a four-slot backplane and a choice of floppy, hard disk or CD-ROM drives; alternatively, it is available with any width of backplane up to a full eight slots if mass storage is not required. For telecoms applications, a H110 complaint backplane can be specified, giving the P3 undefined I/O area, the P4 TDM bus and the P5 telephony I/O areas in addition to the standard CompactPCI P1 and P2 areas.
Power is provided by a 300 W PC ATX 110/220 V a.c. auto-sensing power supply. System cooling is achieved by a 120 mm axial fan mounted below the subrack drawing air in from the lower front and sides with the exhaust through the top; the PSU has its own dedicated fan at the rear of the unit.
The lightweight aluminium housing is strong and rigid and gives good EMC screening with all internal surfaces bonded together. Front and rear panels are EMC sealed and the subrack is recessed to protect the front and rear injector/extractor handle mechanisms. Provision is made to install rear I/O modules in accordance with IEEE-1101.11 ensuring compatibility with a wide variety of system requirements.
BVM is also able to provide the cPC1000 as a ready to run computer configured with a selection of modules from its range of hot swap CompactPCI and PMC modules.
SIGLENT launches new 8 GHz DSO Vepac Electronics
Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.
Read more...Rugged, I/O-rich NVIDIA Jetson solutions Electronic Products Design
Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.
Read more...Mission-critical RF transceiver Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.
Read more...New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.
Read more...Smallest 13th gen Intel SBC Vepac Electronics
Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.
Read more...Versatile PoE extender Vepac Electronics
Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.
Read more...Ultra-portable spectrum analyser Vepac Electronics
Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.
Read more...Versatile 3-in-1 instrument Vepac Electronics
Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...EEPROMs for industrial and military markets Vepac Electronics
DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version