Analogue, Mixed Signal, LSI


SPDT RF switch

31 October 2012 Analogue, Mixed Signal, LSI

Peregrine Semiconductor recently announced the expansion of its high-linearity, low insertion loss RF switch family with the availability of the HaRP technology-enhanced SPDT PE42422 RF switch.

The new switch provides linearity of 115 dBm IIP2 and 70 dBm IIP3; low insertion loss of 0,4 dB @ 3 GHz, and high isolation of 28 dB @ 3 GHz, enabling better overall system performance. It covers a wide frequency range of 100 MHz–6 GHz and, using a nominal +3 V power-supply voltage, a typical input 0,1 dB compression point of +36 dBm can be achieved.

The PE42422 is available in a 2 x 2 mm QFN package, making it well suited for general-purpose RF switching applications such as filter-bank switching in test equipment and base stations.

The 50 &Omega, reflective switch features on-chip, low-voltage CMOS control logic and a wide operating voltage range of 2,3–5,5 V, enabling it to be used it in a variety of ways.

ESD performance of 4 kV HBM for RF pin to ground simplifies manufacturing and improves product reliability. Additionally, with low power consumption of 120 μA, the PE42422 switch helps to extend battery life in portable devices.

For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, [email protected], www.rfdesign.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Multi-band GNSS patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.

Read more...
Wideband MMIC power amp
RF Design Telecoms, Datacoms, Wireless, IoT
The Qorvo QPA2597 is a wideband MMIC power amplifier built using proven GaN on SiC technology and designed to operate across the 2 to 6 GHz frequency range.

Read more...
u-blox redefining what’s possible
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.

Read more...
Multiprotocol SoC
RF Design Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding wireless Bluetooth designs.

Read more...
Ceramic substrate loop antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The DLA.01 DECT ceramic loop antenna from Taoglas is a miniature edge mounted antenna designed for compact devices with minimal space availability.

Read more...
Smart IMU for high/low-g acceleration
Altron Arrow Analogue, Mixed Signal, LSI
The ISM6HG256X is a 6-axis intelligent inertial measurement unit that enables smart motion sensing, edge computing, and real-time awareness.

Read more...
Compact Schottky diodes increase efficiency
RS South Africa Analogue, Mixed Signal, LSI
Gen 3 SiC Schottky diodes from Vishay in the compact SlimSMA HV package increase efficiency while enhancing electrical insulation.

Read more...
Silanna launches Plural ADC EVKs
Analogue, Mixed Signal, LSI
Silanna Semiconductor has released its first evaluation kits for the Plural data converter family to offer the fastest, most cost-effective way to evaluate and deploy high-performance ADCs.

Read more...
High speed, low noise 2 A driver
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM8423-2A from SGMICRO is a high efficiency, class AB, low distortion power line driver optimised to accept a signal from a Power Line Carrier modem.

Read more...
Multiprotocol wireless SoC
RF Design Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding designs in Bluetooth devices.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved